Practical formulation for initial stability of air-supported floaters considering air compressibility effects
Journal of Marine Science and Technology · 18.11.2026
DOI: 10.1007/s00773-026-01147-6 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Marine Science and Technology, online erschienen am 18.11.2026. Verfasst von Shinichiro Hirabayashi und 2 weiteren Autor:innen. Die Arbeit nennt 24 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: The University of Tokyo.
Abstract (Originalsprache)
The stability and motion characteristics of air-supported floaters deviate from conventional displacement-type floaters due to the influence of the entrapped air. In particular, air compressibility induces a scale effect that reduces the restoring force below the value predicted by the Froude similarity law in small-scale model tests. While this effect is well-documented for heave motion, a comprehensive theoretical framework for static stability remains underdeveloped. This study addresses this gap by formulating the effect of air compressibility on the initial static stability of multi-chamber and multi-column floaters, utilizing an equivalent buoyancy model to represent the pressure in the air chamber. The results demonstrate that the compressibility effect can be characterized by the same non-dimensional parameter as the air pocket factor used in heave analysis. The proposed formulation is further extended to mixed-type floaters, which integrate both air chambers and displacement-type elements. By introducing the concept of a “virtual center of buoyancy” accounting for the air chamber, the resulting expressions for the restoring moment and metacentric radius maintain a mathematical form consistent with conventional displacement-type floaters. The proposed model was compared with existing experimental data for preliminary validation. While there are quantitative discrepancies between the experiments and the model estimation for the multi-compartment floater due to the limited availability of specific experimental conditions, the proposed model can successfully replicate the overall trend of the experiments. With a clear consideration of the effect of air compressibility, the proposed formulation is expected to be practically applicable to the design of full-scale floaters.
Förderung
- The University of Tokyo
Zitieren
APA
Hirabayashi, S., Tabeta, S., & Nakajima, T. (2026). Practical formulation for initial stability of air-supported floaters considering air compressibility effects. Journal of Marine Science and Technology. https://doi.org/10.1007/s00773-026-01147-6
Vancouver
Hirabayashi S, Tabeta S, Nakajima T. Practical formulation for initial stability of air-supported floaters considering air compressibility effects. Journal of Marine Science and Technology. 2026. doi:10.1007/s00773-026-01147-6
BibTeX
@article{Hirabayashi2026,
author = {Hirabayashi, Shinichiro and Tabeta, Shigeru and Nakajima, Toshio},
title = {Practical formulation for initial stability of air-supported floaters considering air compressibility effects},
journal = {Journal of Marine Science and Technology},
year = {2026},
doi = {10.1007/s00773-026-01147-6}
}
EUVIMED