EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Influence of CuO on the performance of conducting polymer matrix for screen-printed humidity sensing applications

B S Manjunatha, Shilpa Shetty, Mohammad Saquib, Suma A Rao, Ramakrishna Nayak, Vinod Kamath, M Selvakumar

Microchimica Acta · 2026-03 · 193 (3)

DOI: 10.1007/s00604-026-07897-9 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Microchimica Acta, online erschienen am 17.02.2026. Verfasst von B S Manjunatha und 6 weiteren Autor:innen. Beteiligte Einrichtung: Department of Chemistry, Manipal Institute of Technology, Manipal Academy of Higher Education, Manipal, Karnataka, 576104, India. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 58 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Manipal Academy of Higher Education, Manipal.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

A flexible polyethylene terephthalate (PET) substrate was employed for the fabrication of a resistive-type humidity sensor using screen-printed polypyrrole (PPy)/CuO nanocomposite conductive inks. A series of conducting polymer-metal oxide composite-based sensors with varying compositions was prepared, and their humidity-sensing performances were systematically evaluated. The structural and morphological features of the composites were characterized using scanning electron microscopy (SEM), Fourier-transform infrared spectroscopy (FTIR), and X-ray diffraction (XRD). The sensing behaviour of the printed devices was investigated over a relative humidity (RH) range 22–97% at room temperature, focusing on parameters such as relative resistance, sensitivity, dynamic response, and hysteresis. Enhanced sensitivity was achieved with the incorporation of CuO into PPy. The superior sensing performance is attributed to the combined structural characteristics and hydrophilic nature of CuO. The PPy/CuO nanocomposite with a 1:1 weight ratio, prepared via mechanical mixing and screen printing, exhibited the highest sensitivity over a broad humidity range (22–97% RH), along with fast response/recovery times (~ 50/60 s) and negligible hysteresis.

Schlagwörter

Stichwörter der Autor:innen

Conducting polymersFlexible electronicsHumidity sensingMetal oxide compositesPrinted sensorsScreen-printing technique

Autor:innen und Institutionen

  • Department of Chemistry, Manipal Institute of Technology, Manipal Academy of Higher Education, Manipal, Karnataka, 576104, India.
  • Department of Humanities and Management, Manipal Institute of Technology, Manipal Academy of Higher Education, Manipal, Karnataka, 576104, India.
  • Department of Chemistry, Manipal Institute of Technology, Manipal Academy of Higher Education, Manipal, Karnataka, 576104, India. selva.kumar@manipal.edu.

Förderung

  • Manipal Academy of Higher Education, Manipal

Zitieren

APA

Manjunatha, B. S., Shetty, S., Saquib, M., Rao, S. A., Nayak, R., Kamath, V., & Selvakumar, M. (2026). Influence of CuO on the performance of conducting polymer matrix for screen-printed humidity sensing applications. Microchimica Acta, 193(3). https://doi.org/10.1007/s00604-026-07897-9

Vancouver

Manjunatha BS, Shetty S, Saquib M, Rao SA, Nayak R, Kamath V, et al. Influence of CuO on the performance of conducting polymer matrix for screen-printed humidity sensing applications. Microchimica Acta. 2026;193(3). doi:10.1007/s00604-026-07897-9

BibTeX
@article{Manjunatha2026,
  author = {Manjunatha, B S and Shetty, Shilpa and Saquib, Mohammad and Rao, Suma A and Nayak, Ramakrishna and Kamath, Vinod and Selvakumar, M},
  title = {Influence of CuO on the performance of conducting polymer matrix for screen-printed humidity sensing applications},
  journal = {Microchimica Acta},
  year = {2026},
  volume = {193},
  number = {3},
  doi = {10.1007/s00604-026-07897-9}
}
Kostenlos starten →