EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Inertial microfluidic mixer for biological CubeSat missions

Adrianna Graja, Mateusz Gumieniak, Maciej Dzimira, Tymon Janisz, Agnieszka Krakos

Microchimica Acta · 2024

DOI: 10.1007/s00604-024-06726-1 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Microchimica Acta, 2024. Verfasst von Adrianna Graja und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Microsystems, Faculty of Electronics, Photonics and Microsystems, Wroclaw University of Science and Technology, Janiszewskiego 11/17, 5…. Hauptthemen laut MEDLINE: Lab-On-A-Chip Devices. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Nanosatellites of CubeSat type due to, i.a ., minimized costs of space missions, as well as the potential large application area, have become a significant part of the space economy sector recently. The opportunity to apply miniaturized microsystem (MEMS) tools in satellite space missions further accelerates both the space and the MEMS markets, which in the coming years are considered to become inseparable. As a response to the aforementioned perspectives, this paper presents a microfluidic mixer system for biological research to be conducted onboard CubeSat nanosatellites. As a high complexity of the space systems is not desired due to the need for failure-free and remotely controlled operation, the principal concept of the work was to design an entirely passive micromixer, based on lab-on-chip technologies. For the first time, the microfluidic mixer that uses inertial force generated by rocket engines during launch to the orbit is proposed to provide an appropriate mixing of liquid samples. Such a solution not only saves the space occupied by standard pumping systems, but also reduces the energy requirements, ultimately minimizing the number of battery modules and the whole CubeSat size. The structures of the microfluidic mixers were fabricated entirely out of biocompatible resins using MultiJet 3D printing technology. To verify the functionality of the passive mixing system, optical detection consisting of the array of blue LEDs and phototransistors was applied successfully. The performance of the device was tested utilizing an experimental rocket, as a part of the Spaceport America Cup 2023 competition. Graphical abstract

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Lab-On-A-Chip DevicesSpace FlightMicrofluidic Analytical TechniquesEquipment Design

Stichwörter der Autor:innen

3D printingBiological nanosatelliteCubeSatLab-on-chipMicrofluidicsPassive micromixer

Autor:innen und Institutionen

  • Department of Microsystems, Faculty of Electronics, Photonics and Microsystems, Wroclaw University of Science and Technology, Janiszewskiego 11/17, 50-372, Wroclaw, Poland.
  • Department of Microsystems, Faculty of Electronics, Photonics and Microsystems, Wroclaw University of Science and Technology, Janiszewskiego 11/17, 50-372, Wroclaw, Poland. agnieszka.krakos@pwr.edu.pl.

Zitieren

APA

Graja, A., Gumieniak, M., Dzimira, M., Janisz, T., & Krakos, A. (2024). Inertial microfluidic mixer for biological CubeSat missions. Microchimica Acta. https://doi.org/10.1007/s00604-024-06726-1

Vancouver

Graja A, Gumieniak M, Dzimira M, Janisz T, Krakos A. Inertial microfluidic mixer for biological CubeSat missions. Microchimica Acta. 2024. doi:10.1007/s00604-024-06726-1

BibTeX
@article{Graja2024,
  author = {Graja, Adrianna and Gumieniak, Mateusz and Dzimira, Maciej and Janisz, Tymon and Krakos, Agnieszka},
  title = {Inertial microfluidic mixer for biological CubeSat missions},
  journal = {Microchimica Acta},
  year = {2024},
  doi = {10.1007/s00604-024-06726-1}
}
Kostenlos starten →