EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Potential for 50% Mechanical Strength Decline in Sandstone Reservoirs Due to Salt Precipitation and CO2–Brine Interactions During Carbon Sequestration

Mohammad Nooraiepour, Krzysztof Polański, Mohammad Masoudi, Szymon Kuczyński, Hannelore Derluyn, Liebert Parreiras Nogueira, Bahman Bohloli, Stanislaw Nagy, Helge Hellevang

Rock Mechanics and Rock Engineering · 2025-01 · 58 (1) · 1239-1269

DOI: 10.1007/s00603-024-04223-8 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Rock Mechanics and Rock Engineering, online erschienen am 28.10.2024. Verfasst von Mohammad Nooraiepour und 8 weiteren Autor:innen. Die Arbeit wurde bisher 40-mal zitiert (Crossref) und nennt 142 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Norway Grants, University of Oslo.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Predictive modeling of CO 2 storage sites requires a detailed understanding of physico-chemical processes and scale-up challenges. Dramatic injectivity decline may occur due to salt precipitation pore clogging in high-salinity aquifers during subsurface CO 2 injection. This study aims to elucidate the impact of CO 2 -induced salt crystallization in the porous medium on the geomechanical properties of reservoir sandstones. As the impact of salt precipitation cannot be isolated from the precursor interactions with CO 2 and acidified brine, we present a comprehensive review and discuss CO 2 chemo-mechanical interactions with sandstones. Laboratory geochemical CO 2 –brine–rock interactions at elevated pressures and temperatures were conducted on two sandstone sets with contrasting petrophysical qualities. Interaction paths comprised treatment with (a) CO 2 -acidified brine and (b) supercritical injection until brine dry-out, salt crystallization, and growth. Afterward, the core samples were tested in a triaxial apparatus at varying stresses and temperatures. The elastic moduli of intact, CO 2 -acidified brine treated, and salt-affected sandstones were juxtaposed to elucidate the geochemical–geomechanical-coupled impacts and identify the extent of crystallization damages. The salt-affected sandstones showed a maximum of 50% reduction in Young’s and shear moduli and twice an increase in Poisson’s ratio compared to intact condition. The deterioration was notably higher for the tighter reservoir sandstones, with higher initial stiffness and lower porosity–permeability. We propose two pore- and grain-scale mechanisms to explain how salt crystallization contributes to stress localization and mechanical damage. The results highlight the potential integrity risk imposed by salt crystallization in (hyper)saline aquifers besides injectivity, signaling mechanical failure exacerbated by pressure buildup.

Förderung

  • Norway Grants
  • University of Oslo

Zitieren

APA

Nooraiepour, M., Polański, K., Masoudi, M., Kuczyński, S., Derluyn, H., Nogueira, L. P., Bohloli, B., Nagy, S., & Hellevang, H. (2025). Potential for 50% Mechanical Strength Decline in Sandstone Reservoirs Due to Salt Precipitation and CO2–Brine Interactions During Carbon Sequestration. Rock Mechanics and Rock Engineering, 58(1), 1239-1269. https://doi.org/10.1007/s00603-024-04223-8

Vancouver

Nooraiepour M, Polański K, Masoudi M, Kuczyński S, Derluyn H, Nogueira LP, et al. Potential for 50% Mechanical Strength Decline in Sandstone Reservoirs Due to Salt Precipitation and CO2–Brine Interactions During Carbon Sequestration. Rock Mechanics and Rock Engineering. 2025;58(1):1239-1269. doi:10.1007/s00603-024-04223-8

BibTeX
@article{Nooraiepour2025,
  author = {Nooraiepour, Mohammad and Polański, Krzysztof and Masoudi, Mohammad and Kuczyński, Szymon and Derluyn, Hannelore and Nogueira, Liebert Parreiras and Bohloli, Bahman and Nagy, Stanislaw and Hellevang, Helge},
  title = {Potential for 50% Mechanical Strength Decline in Sandstone Reservoirs Due to Salt Precipitation and CO2–Brine Interactions During Carbon Sequestration},
  journal = {Rock Mechanics and Rock Engineering},
  year = {2025},
  volume = {58},
  number = {1},
  pages = {1239--1269},
  doi = {10.1007/s00603-024-04223-8}
}
Kostenlos starten →