EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Assessment of Anisotropic Elastic Parameters Using Laboratory Triaxial and In-Situ Pressuremeter Tests in Opalinus Clay

Lang Liu, Derek Martin, Silvio B. Giger, Rick Chalaturnyk

Rock Mechanics and Rock Engineering · 2024-11 · 57 (11) · 10153-10165

DOI: 10.1007/s00603-024-04030-1 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Rock Mechanics and Rock Engineering, online erschienen am 26.06.2024. Verfasst von Lang Liu und 3 weiteren Autor:innen. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 24 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: SINTEF.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Opalinus Clay is a stratified shale that exhibits anisotropic deformation properties. In this work, the transversely isotropic deformation parameters of Opalinus Clay are summarized from recent undrained triaxial test campaigns. Relatively consistent values are found for Poisson’s ratios representing different orientations, regardless of the lithofacies and the effective confining stresses used in the tests. Pressuremeter tests were performed at the Mont Terri Rock Laboratory in two boreholes perpendicular and parallel to bedding, respectively. The elastic moduli normal to the borehole wall (borehole moduli) are determined using unloading data obtained at multiple diametric caliper axes and exhibit strong anisotropy for the tests in the borehole parallel to bedding. The anisotropic borehole moduli are predicted based on Amadei and Savage’s (Int J Rock Mech Min Sci 28:383–396, 1991. https://doi.org/10.1016/0148-9062(91)90077-Y ) analytical solution using the laboratory-derived Poisson’s ratios and the shear modulus derived from pressuremeter tests in the borehole perpendicular to bedding. The prediction overestimates the magnitude of the borehole moduli but underestimates their anisotropic ratio compared to that from pressuremeter measurement. Drilling a borehole parallel to the bedding of Opalinus Clay is known to induce a local borehole damage zone preferentially developed normal to bedding. The results from a finite element analysis that incorporates this local damage are in better agreement with the pressuremeter measurement.

Förderung

  • SINTEF

Zitieren

APA

Liu, L., Martin, D., Giger, S. B., & Chalaturnyk, R. (2024). Assessment of Anisotropic Elastic Parameters Using Laboratory Triaxial and In-Situ Pressuremeter Tests in Opalinus Clay. Rock Mechanics and Rock Engineering, 57(11), 10153-10165. https://doi.org/10.1007/s00603-024-04030-1

Vancouver

Liu L, Martin D, Giger SB, Chalaturnyk R. Assessment of Anisotropic Elastic Parameters Using Laboratory Triaxial and In-Situ Pressuremeter Tests in Opalinus Clay. Rock Mechanics and Rock Engineering. 2024;57(11):10153-10165. doi:10.1007/s00603-024-04030-1

BibTeX
@article{Liu2024,
  author = {Liu, Lang and Martin, Derek and Giger, Silvio B. and Chalaturnyk, Rick},
  title = {Assessment of Anisotropic Elastic Parameters Using Laboratory Triaxial and In-Situ Pressuremeter Tests in Opalinus Clay},
  journal = {Rock Mechanics and Rock Engineering},
  year = {2024},
  volume = {57},
  number = {11},
  pages = {10153--10165},
  doi = {10.1007/s00603-024-04030-1}
}
Kostenlos starten →