EUVIMEDEUVIMED entdecken
Systematische ÜbersichtOpen Access · CC BY 4.0

Clinical applications of 3D printing in spine surgery: a systematic review

Benjamin Hajnal iD, Agoston Jakab Pokorni iD, Mate Turbucz iD, Ferenc Bereczki iD, Marton Bartos iD, Aron Lazary iD, Peter Endre Eltes iD

European Spine Journal · 2025-02 · 34 (2) · 454-471

DOI: 10.1007/s00586-024-08594-y ↗

Kurz gefasst

Systematische Übersicht in der Zeitschrift European Spine Journal, online erschienen am 07.01.2025. Verfasst von Benjamin Hajnal und 6 weiteren Autor:innen. Beteiligte Einrichtung: In Silico Biomechanics Laboratory, National Center for Spinal Disorders, Buda Health Center, Budapest, Hungary. Hauptthemen laut MEDLINE: Orthopedic Procedures, Printing, Three-Dimensional, Spinal Diseases, Spine. Die Arbeit wurde bisher 31-mal zitiert (Crossref) und nennt 122 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Semmelweis University.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Purpose

The objective of this systematic review is to present a comprehensive summary of existing research on the use of 3D printing in spinal surgery.

Methods

The researchers conducted a thorough search of four digital databases (PubMed, Web of Science, Scopus, and Embase) to identify relevant studies published between January 1999 and December 2022. The review focused on various aspects, including the types of objects printed, clinical applications, clinical outcomes, time and cost considerations, 3D printing materials, location of 3D printing, and technologies utilized. Out of the 1620 studies initially identified and the 17 added by manual search, 105 met the inclusion criteria for this review, collectively involving 2088 patients whose surgeries involved 3D printed objects.

Results

The studies presented a variety of 3D printed devices, such as anatomical models, intraoperative navigational templates, and customized implants. The most widely used type of objects are drill guides (53%) and anatomical models (25%) which can also be used for simulating the surgery. Custom made implants are much less frequently used (16% of papers). These devices significantly improved clinical outcomes, particularly enhancing the accuracy of pedicle screw placement. Most studies (88%) reported reduced operation times, although two noted longer times due to procedural complexities. A variety of 3DP technologies and materials were used, with STL, FDM, and SLS common for models and guides, and titanium for implants via EBM, SLM, and DMLS. Materialise software (Mimics, 3-Matic, Magics) was frequently utilized. While most studies mentioned outsourced production, in-house printing was implied in several cases, indicating a trend towards localized 3D printing in spine surgery.

Conclusions

3D printing in spine surgery, a rapidly growing area of research, is predominantly used for creating drill guides for screw insertion, anatomical models, and innovative implants, enhancing clinical outcomes and reducing operative time. While cost-efficiency remains uncertain due to insufficient data, some 3D printing applications, like pedicle screw drill guides, are already widely accepted and routinely used in hospitals.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Orthopedic ProceduresPrinting, Three-DimensionalSpinal DiseasesSpineSurgery, Computer-AssistedHumansModels, AnatomicPedicle Screws

Stichwörter der Autor:innen

3D Printing3D SoftwareSpine surgery

Autor:innen und Institutionen

  • In Silico Biomechanics Laboratory, National Center for Spinal Disorders, Buda Health Center, Budapest, Hungary.
  • School of PhD Studies, Semmelweis University, Budapest, Hungary.
  • Department of Spine Surgery, Department of Orthopaedics, Semmelweis University, Üllői St. 26, Budapest, 1085, Hungary.
  • In Silico Biomechanics Laboratory, National Center for Spinal Disorders, Buda Health Center, Budapest, Hungary. eltespeter@yahoo.com.
  • Department of Spine Surgery, Department of Orthopaedics, Semmelweis University, Üllői St. 26, Budapest, 1085, Hungary. eltespeter@yahoo.com.

ORCID-Profile: Benjamin Hajnal, Agoston Jakab Pokorni, Mate Turbucz, Ferenc Bereczki, Marton Bartos, Aron Lazary, Peter Endre Eltes

Förderung

  • Semmelweis University

Zitieren

APA

Hajnal, B., Pokorni, A. J., Turbucz, M., Bereczki, F., Bartos, M., Lazary, A., & Eltes, P. E. (2025). Clinical applications of 3D printing in spine surgery: a systematic review. European Spine Journal, 34(2), 454-471. https://doi.org/10.1007/s00586-024-08594-y

Vancouver

Hajnal B, Pokorni AJ, Turbucz M, Bereczki F, Bartos M, Lazary A, et al. Clinical applications of 3D printing in spine surgery: a systematic review. European Spine Journal. 2025;34(2):454-471. doi:10.1007/s00586-024-08594-y

BibTeX
@article{Hajnal2025,
  author = {Hajnal, Benjamin and Pokorni, Agoston Jakab and Turbucz, Mate and Bereczki, Ferenc and Bartos, Marton and Lazary, Aron and Eltes, Peter Endre},
  title = {Clinical applications of 3D printing in spine surgery: a systematic review},
  journal = {European Spine Journal},
  year = {2025},
  volume = {34},
  number = {2},
  pages = {454--471},
  doi = {10.1007/s00586-024-08594-y}
}
Kostenlos starten →