EUVIMEDEUVIMED entdecken
Crossref

Is 3D-printed self-stabilizing endoprosthesis reconstruction without supplemental fixation following total sacrectomy a viable approach for sacral tumours?

Taojun Gong, Minxun Lu, Yitian Wang, Zhuangzhuang Li, Xuanhong He, Yi Luo, Yong Zhou, Chongqi Tu, Li Min

European Spine Journal · 2024

DOI: 10.1007/s00586-024-08292-9 ↗

Kurz gefasst

Fachartikel in der Zeitschrift European Spine Journal, 2024. Verfasst von Taojun Gong und 8 weiteren Autor:innen. Beteiligte Einrichtung: Department of Orthopedics, Orthopedic Research Institute, Model Worker and Craftsman Talent Innovation Workshop of Sichuan Province, West China Hospi…. Hauptthemen laut MEDLINE: Sacrum, Printing, Three-Dimensional, Spinal Neoplasms, Plastic Surgery Procedures. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 29 Literaturangaben. Gefördert von: Qingdao Research Institute of Sichuan University '8122 Project' Fund.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

PURPOSE: The spinopelvic reconstruction poses significant challenges following total sacrectomy in patients with malignant or aggressive benign bone tumours encompassing the entire sacrum. In this study, we aim to assess the functional outcomes and complications of an integrated 3D-printed sacral endoprostheses featuring a self-stabilizing design, eliminating the requirement for supplemental fixation. METHODS: We retrospectively analyzed patients with sacral tumours who underwent total sacrectomy followed by reconstruction with 3D-printed self-stabilizing endoprosthesis. Clinically, we evaluated functional outcomes using the 1993 version of the musculoskeletal tumour society (MSTS-93) score. Perioperative and postoperative complications were also documented. RESULTS: 10 patients met final inclusion criteria. The median age was 49 years (range, 31-64 years). The median follow-up time was 26.5 months (range, 15-47 months). Median postoperative functional MSTS-93 was 22.5 (range, 13-25). The median operation time was 399.5 min (305-576 min), and the median intraoperative blood loss was and 3200 ml (2400-7800 ml). Complications include wound dehiscence in one patient, bowel, bladder, and sexual dysfunction in four patients, cerebrospinal fluid leak in one patient, and tumour recurrence in one patient. There were no mechanical complications related to the endoprosthesis at the last follow-up. CONCLUSION: The utilization of 3D-printed self-stabilizing endoprosthesis proved to be a viable approach, yielding satisfactory short-term outcomes in patients undergoing total sacral reconstruction without supplemental fixation.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

SacrumPrinting, Three-DimensionalSpinal NeoplasmsPlastic Surgery ProceduresHumansMiddle AgedAdultMaleFemaleRetrospective StudiesProstheses and ImplantsTreatment OutcomeProsthesis Implantation

Stichwörter der Autor:innen

3D-printed endoprosthesisSacrumSelf-stabilizingSpinopelvic reconstructionTotal sacrectomy

Autor:innen und Institutionen

  • Department of Orthopedics, Orthopedic Research Institute, Model Worker and Craftsman Talent Innovation Workshop of Sichuan Province, West China Hospital, Sichuan University, Chengdu, People's Republic of China.
  • Department of Orthopedics, Orthopaedic Research Institute, Sichuan Model Worker and Craftsman Talent Innovation Research Studio, West China Hospital, Sichuan University, Chengdu, People's Republic of China. Tucq@scu.edu…
  • Department of Orthopedics, Orthopedic Research Institute, Model Worker and Craftsman Talent Innovation Workshop of Sichuan Province, West China Hospital, Sichuan University, Chengdu, People's Republic of China. minli120…

Förderung

  • Qingdao Research Institute of Sichuan University '8122 Project' Fund

Zitieren

APA

Gong, T., Lu, M., Wang, Y., Li, Z., He, X., Luo, Y., Zhou, Y., Tu, C., & Min, L. (2024). Is 3D-printed self-stabilizing endoprosthesis reconstruction without supplemental fixation following total sacrectomy a viable approach for sacral tumours?. European Spine Journal. https://doi.org/10.1007/s00586-024-08292-9

Vancouver

Gong T, Lu M, Wang Y, Li Z, He X, Luo Y, et al. Is 3D-printed self-stabilizing endoprosthesis reconstruction without supplemental fixation following total sacrectomy a viable approach for sacral tumours?. European Spine Journal. 2024. doi:10.1007/s00586-024-08292-9

BibTeX
@article{Gong2024,
  author = {Gong, Taojun and Lu, Minxun and Wang, Yitian and Li, Zhuangzhuang and He, Xuanhong and Luo, Yi and Zhou, Yong and Tu, Chongqi and Min, Li},
  title = {Is 3D-printed self-stabilizing endoprosthesis reconstruction without supplemental fixation following total sacrectomy a viable approach for sacral tumours?},
  journal = {European Spine Journal},
  year = {2024},
  doi = {10.1007/s00586-024-08292-9}
}
Kostenlos starten →