Process Development and Risk Assessment for Processing Magnesium Alloys Using LPBF Technology
BHM Berg- und Hüttenmännische Monatshefte · 2025-03 · 170 (3) · 132-139
DOI: 10.1007/s00501-025-01559-8 ↗Kurz gefasst
Fachartikel in der Zeitschrift BHM Berg- und Hüttenmännische Monatshefte, online erschienen am 11.02.2025. Verfasst von Franz Haas und 4 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 20 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Graz University of Technology.
Abstract (Originalsprache)
Lightweight design is very closely associated with additive manufacturing. Besides the design possibilities offered by this technology, the material used also plays a key role. Especially in the LPBF process, the production of the powder and the processing of the material is a major challenge. This applies in particular to magnesium alloys as a lightweight material. Due to its low density and good strength and rigidity properties, this material is ideal for lightweight engineering applications. The basis of this contribution is a risk assessment (including a detailed FMEA and measures to minimize risks) for the processing and handling of magnesium powder in the LPBF process. As part of the practical tests, several test specimens with existing parameters for AZ91D were printed, and their properties (relative density, microstructure and bonding behaviour) were analysed. By adjusting the alloy composition (improved evaporation characteristics) and optimizing the process (e.g. optimum inert gas flow, platform temperature) and the process parameters, it is possible to process magnesium more economically in the LPBF process.
Förderung
- Graz University of Technology
Zitieren
APA
Haas, F., Tiefnig, R., Braun, M., Taschauer, M., & Steinacker, S. (2025). Process Development and Risk Assessment for Processing Magnesium Alloys Using LPBF Technology. BHM Berg- und Hüttenmännische Monatshefte, 170(3), 132-139. https://doi.org/10.1007/s00501-025-01559-8
Vancouver
Haas F, Tiefnig R, Braun M, Taschauer M, Steinacker S. Process Development and Risk Assessment for Processing Magnesium Alloys Using LPBF Technology. BHM Berg- und Hüttenmännische Monatshefte. 2025;170(3):132-139. doi:10.1007/s00501-025-01559-8
BibTeX
@article{Haas2025,
author = {Haas, Franz and Tiefnig, Raphael and Braun, Marcel and Taschauer, Michael and Steinacker, Stephan},
title = {Process Development and Risk Assessment for Processing Magnesium Alloys Using LPBF Technology},
journal = {BHM Berg- und Hüttenmännische Monatshefte},
year = {2025},
volume = {170},
number = {3},
pages = {132--139},
doi = {10.1007/s00501-025-01559-8}
}
EUVIMED