Modified mesoporous silica derived from bamboo leaf using cetyltrimethylammonium bromide and 3-aminopropyl triethoxysilane as CO2 adsorbent in biogas purification
Bioprocess and Biosystems Engineering · 2024
DOI: 10.1007/s00449-024-02985-7 ↗Kurz gefasst
Fachartikel in der Zeitschrift Bioprocess and Biosystems Engineering, 2024. Verfasst von S Silviana und 7 weiteren Autor:innen. Beteiligte Einrichtung: Department of Chemical Engineering, Faculty of Engineering, Diponegoro University, Jl. Prof. Soedarto, S.H., Tembalang, Semarang, 50275, Indonesia. s…. Hauptthemen laut MEDLINE: Silicon Dioxide, Biofuels, Propylamines, Silanes. Die Arbeit nennt 60 Literaturangaben.
Abstract (Originalsprache)
The calorific value of post-fermentation biogas is a way down below standard and quite low due to the presence of high amount level of carbon dioxide (CO2) biogas mixture. Therefore, it raises the need to process the biogas, separating it from CO2 in order to obtain high-purity biogas as well as to maximize its calorific value. One widely available material that can be used as a sustainable carbon capture adsorbent is silica extracted from bamboo leaves. However, so that silica can act as CO2 adsorber, it is necessary to modify the surface of silica with CTAB and APTES (3-aminopropyl triethoxysilane). In this study, 2-stage method was carried out, namely preparation of mesoporous silica and surface modification using APTES on the mesoporous silica. Experiments in synthesizing APTES-modified silica were obtained by varying its composition: CTAB (1.5-5%w), (HCl 1.5-5 N), and APTES (10-30%). A central composite design (CCD) was employed in exploring the interaction between all variables and also performed for the optimization. Through analysis of variance, it shows that optimum CO2 adsorption capacity reaches 47.02 mg g-1, by applying 4.98% of CTAB, 4.28 N of HCl and 10.08% of APTES. Pseudo-second-order kinetic and Redlich-Peterson isotherm models are more representative to show the adsorption behavior of CO2 into the modified silica. The results show that the modified silica with APTES shows a prospective application of silica for CO2 removal from biogas.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- Department of Chemical Engineering, Faculty of Engineering, Diponegoro University, Jl. Prof. Soedarto, S.H., Tembalang, Semarang, 50275, Indonesia. silviana@che.undip.ac.id.
- Department of Chemical Engineering, Faculty of Engineering, Diponegoro University, Jl. Prof. Soedarto, S.H., Tembalang, Semarang, 50275, Indonesia.
Zitieren
APA
Silviana, S., Sumardiono, S., Ariyanti, D., Pramudono, B., Ramadhan, F. A., Pehang, R. F., Silvester, R. V., & Puspa, M. B. (2024). Modified mesoporous silica derived from bamboo leaf using cetyltrimethylammonium bromide and 3-aminopropyl triethoxysilane as CO2 adsorbent in biogas purification. Bioprocess and Biosystems Engineering. https://doi.org/10.1007/s00449-024-02985-7
Vancouver
Silviana S, Sumardiono S, Ariyanti D, Pramudono B, Ramadhan FA, Pehang RF, et al. Modified mesoporous silica derived from bamboo leaf using cetyltrimethylammonium bromide and 3-aminopropyl triethoxysilane as CO2 adsorbent in biogas purification. Bioprocess and Biosystems Engineering. 2024. doi:10.1007/s00449-024-02985-7
BibTeX
@article{Silviana2024,
author = {Silviana, S and Sumardiono, Siswo and Ariyanti, Dessy and Pramudono, Bambang and Ramadhan, Faisal Azis and Pehang, Rizqi Furqon and Silvester, Reynold Valentino and Puspa, Meitri Bella},
title = {Modified mesoporous silica derived from bamboo leaf using cetyltrimethylammonium bromide and 3-aminopropyl triethoxysilane as CO2 adsorbent in biogas purification},
journal = {Bioprocess and Biosystems Engineering},
year = {2024},
doi = {10.1007/s00449-024-02985-7}
}
EUVIMED