EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Anionic collagen processed by alkaline hydrolysis: rheological, biological, and 3D printability assessment

Lívia C. Massimino, Mirella R. V. Bertolo-Cagnoto, Larissa Tessaro, Virginia da C. A. Martins, Bianca Chieregato Maniglia, Ana Maria de G. Plepis, Monica B. Mathor

Rheologica Acta · 2026-06 · 65 (6) · 503-523

DOI: 10.1007/s00397-026-01567-6 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Rheologica Acta, online erschienen am 13.04.2026. Verfasst von Lívia C. Massimino und 6 weiteren Autor:innen. Die Arbeit nennt 69 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Universidade De São Paulo.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Collagen is the most abundant structural protein in the extracellular matrix, and its biocompatibility can be enhanced by chemical modification into a negatively charged matrix. This study investigates the effect of alkaline hydrolysis time (24, 48, 72, and 96` h) on the rheological behavior and processability of anionic concentrated collagen solutions extracted from bovine tendon. By systematically modulating hydrolysis time, we demonstrate how increasing negative charge density drives a rearrangement of the collagen network, resulting in more elastic and shear-thinning behavior, as evidenced by higher storage moduli, increased zero-shear viscosity, and enhanced creep-recovery response. Among the tested formulations, the 72-h hydrolyzed collagen exhibited the most balanced rheological profile and enabled extrusion-based 3D printing with high fidelity, achieving geometry preservation of 104 ± 4% (star angle), 98 ± 2% (scaffold area), and effective macroporosity of 84%. Longer hydrolysis led to decreased scaffold pore size and increased absorption of phosphate-buffered saline. All materials were non-cytotoxic and supported cell adhesion (58.74—74.89%). Overall, this work highlights how rheological characterization can guide the design and processability of collagen-based bioinks, linking structural and mechanical properties to 3D printing performance and biological outcomes.

Förderung

  • Universidade De São Paulo

Zitieren

APA

Massimino, L. C., Bertolo-Cagnoto, M. R. V., Tessaro, L., Martins, V. D. C. A., Maniglia, B. C., Plepis, A. M. D. G., & Mathor, M. B. (2026). Anionic collagen processed by alkaline hydrolysis: rheological, biological, and 3D printability assessment. Rheologica Acta, 65(6), 503-523. https://doi.org/10.1007/s00397-026-01567-6

Vancouver

Massimino LC, Bertolo-Cagnoto MRV, Tessaro L, Martins VDCA, Maniglia BC, Plepis AMDG, et al. Anionic collagen processed by alkaline hydrolysis: rheological, biological, and 3D printability assessment. Rheologica Acta. 2026;65(6):503-523. doi:10.1007/s00397-026-01567-6

BibTeX
@article{Massimino2026,
  author = {Massimino, Lívia C. and Bertolo-Cagnoto, Mirella R. V. and Tessaro, Larissa and Martins, Virginia da C. A. and Maniglia, Bianca Chieregato and Plepis, Ana Maria de G. and Mathor, Monica B.},
  title = {Anionic collagen processed by alkaline hydrolysis: rheological, biological, and 3D printability assessment},
  journal = {Rheologica Acta},
  year = {2026},
  volume = {65},
  number = {6},
  pages = {503--523},
  doi = {10.1007/s00397-026-01567-6}
}
Kostenlos starten →