Time-resolved 3D reconstruction of an early-stage condensing microdroplet using digital holographic microscopy
Experiments in Fluids · 2026-11 · 67 (11)
DOI: 10.1007/s00348-026-04323-x ↗Kurz gefasst
Fachartikel in der Zeitschrift Experiments in Fluids, online erschienen am 13.10.2026. Verfasst von Sangmin Song und 3 weiteren Autor:innen. Die Arbeit nennt 26 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: Korea Institute of Energy Technology Evaluation and Planning (KETEP) and Ministry of Trade, Industry & Energy (MOTIE), Republic of Korea, Research Council of Norway.
Abstract (Originalsprache)
Early-stage condensation droplets set initial conditions for subsequent growth, coalescence, and surface re-exposure, yet their time-resolved three-dimensional morphology at the microscale remains difficult to measure using conventional two-dimensional imaging techniques. Here, digital holographic microscopy (DHM) was used to reconstruct time-resolved height fields of an individual condensing microdroplet on a silane-coated glass surface, with lateral and temporal resolutions of 0.83 μ\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\upmu }$$\end{document}m and 66 ms, respectively. The reconstructed phase fields were converted into droplet height maps, from which maximum height, footprint-equivalent diameter, integrated volume, and projected-boundary descriptors were quantified. For the representative droplet analyzed in this study, early growth departed from uniform spherical-cap-like enlargement. Vertical growth was more pronounced than lateral footprint expansion during an early growth interval, while projected-boundary analysis showed that the initially less regular footprint became more circular as growth proceeded. At three selected growth stages, threshold-aligned spherical-cap cross-estimates underestimated the DHM-measured maximum height by 10.47–17.29% and the projected-footprint area by 9.00–27.74%, while overestimating the integrated volume by 9.84–28.53%. These observations indicate that the early lateral development of the analyzed droplet did not occur through uniform self-similar expansion, but through non-uniform morphological evolution involving coupled height growth, footprint development, volume accumulation, and boundary regularization. Together, the coupled temporal measurements and direct geometric comparison demonstrate that DHM can quantify non-uniform three-dimensional morphological evolution and assess the limitations of simplified droplet geometries during early-stage condensation.
Förderung
- Korea Institute of Energy Technology Evaluation and Planning (KETEP) and Ministry of Trade, Industry & Energy (MOTIE), Republic of Korea
- Research Council of Norway
Zitieren
APA
Song, S., Park, I. W., Dorao, C. A., & Fernandino, M. (2026). Time-resolved 3D reconstruction of an early-stage condensing microdroplet using digital holographic microscopy. Experiments in Fluids, 67(11). https://doi.org/10.1007/s00348-026-04323-x
Vancouver
Song S, Park IW, Dorao CA, Fernandino M. Time-resolved 3D reconstruction of an early-stage condensing microdroplet using digital holographic microscopy. Experiments in Fluids. 2026;67(11). doi:10.1007/s00348-026-04323-x
BibTeX
@article{Song2026,
author = {Song, Sangmin and Park, Il Woong and Dorao, Carlos Alberto and Fernandino, Maria},
title = {Time-resolved 3D reconstruction of an early-stage condensing microdroplet using digital holographic microscopy},
journal = {Experiments in Fluids},
year = {2026},
volume = {67},
number = {11},
doi = {10.1007/s00348-026-04323-x}
}
EUVIMED