Effects of flame spray coating of Al₂O₃–TiO₂ on the structural and mechanical properties of boron steel surfaces
Applied Physics A · 2026-04 · 132 (4)
DOI: 10.1007/s00339-026-09515-0 ↗Kurz gefasst
Fachartikel in der Zeitschrift Applied Physics A, online erschienen am 26.03.2026. Verfasst von Gozde Altuntas und 4 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 34 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Gazi University.
Abstract (Originalsprache)
In this study, a boron-alloyed microalloyed steel was subjected to austenitizing and tempering heat treatments, followed by surface coating using the flame spray technique. Ceramic powders containing 87% Al₂O₃ and 13% TiO₂ with an average particle size of approximately 50 μm were used to produce coatings at three different thicknesses. Prior to coating, surface preparation was performed by sandblasting treatment to ensure optimal adhesion. After the coating process, the density of the coatings was measured using the Archimedes principle to indirectly assess porosity, interfacial bonding quality, and overall coating integrity. The phase structure, crystallinity, and structural transformations of the coated surfaces were analyzed by X-ray diffraction (XRD). Additionally, dislocation density values were calculated from the XRD data to evaluate the crystallographic characteristics of the coatings. The mechanical performance was assessed through wear tests and hardness measurements conducted on both coated and uncoated samples. The results demonstrated that the flame spray coating significantly enhanced the surface properties of the boron-alloyed steel, providing up to a 45% improvement in wear resistance. Furthermore, salt spray corrosion testing revealed that the coated specimens exhibited superior corrosion resistance without any visible surface degradation, highlighting the effective environmental protection offered by the Al₂O₃–TiO₂ ceramic coating.
Förderung
- Gazi University
Zitieren
APA
Altuntas, G., Altun, F., Bayar, A., Asmatulu, R., & Bostan, B. (2026). Effects of flame spray coating of Al₂O₃–TiO₂ on the structural and mechanical properties of boron steel surfaces. Applied Physics A, 132(4). https://doi.org/10.1007/s00339-026-09515-0
Vancouver
Altuntas G, Altun F, Bayar A, Asmatulu R, Bostan B. Effects of flame spray coating of Al₂O₃–TiO₂ on the structural and mechanical properties of boron steel surfaces. Applied Physics A. 2026;132(4). doi:10.1007/s00339-026-09515-0
BibTeX
@article{Altuntas2026,
author = {Altuntas, Gozde and Altun, Fatih and Bayar, Abdülcelil and Asmatulu, Ramazan and Bostan, Bülent},
title = {Effects of flame spray coating of Al₂O₃–TiO₂ on the structural and mechanical properties of boron steel surfaces},
journal = {Applied Physics A},
year = {2026},
volume = {132},
number = {4},
doi = {10.1007/s00339-026-09515-0}
}
EUVIMED