EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

The influence of the physicochemical processes on the electrical response of Al/p-Si structure with etched surface

Yosef Badali, Yashar Azizian-Kalandaragh

Applied Physics A · 2024-04 · 130 (4)

DOI: 10.1007/s00339-024-07393-y ↗

Kurz gefasst

Fachartikel in der Zeitschrift Applied Physics A, online erschienen am 23.03.2024. Verfasst von Yosef Badali und 1 weiteren Autor:innen. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 63 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Istanbul Commerce University.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this paper, the electrochemical etching process is used for surface modification of the p-Si wafer, named as porous silicon (PS), in the metal–semiconductor (MS) type Schottky diode (SD) with a structure of Al/p-Si. Five regions of PS wafer with different etching rates are selected for comparison of them which are called P 2 , P 3 , P 4, and P 5 (P 1 is the reference area without porosity). The morphological, structural, and electrical properties of the PS used in the MS-type SD are investigated using field-emission scanning electron microscope (FE-SEM) images, energy dispersive X-ray (EDX) analysis, and current–voltage (I–V) characteristics, respectively. The FE-SEM images show a meaningful effect on the porosity. The EDX spectrum demonstrates the importance of the chemical effects in addition to the physical changes in the porosity process of the p-Si wafer. The reverse-saturation current (I 0 ), ideality factor (n), barrier height at zero-bias (Φ B0 ), and series/shunt electrical resistances are also computed and compared. Some of these parameters (n, Rs, BH) are determined using different methods, namely Thermionic emission (TE), Cheung functions, and modified Norde, and they exhibit strong agreement with each other. The energy-dependent profiles of surface states (Nss) are estimated from the I–V data by considering the voltage dependence of Φ B (V) and n(V). All the experimental findings indicate that the etching process of the p-Si wafer significantly influences the electrical performance of the Al/p-Si Schottky diode by increasing the extent of etching.

Förderung

  • Istanbul Commerce University

Zitieren

APA

Badali, Y., & Azizian-Kalandaragh, Y. (2024). The influence of the physicochemical processes on the electrical response of Al/p-Si structure with etched surface. Applied Physics A, 130(4). https://doi.org/10.1007/s00339-024-07393-y

Vancouver

Badali Y, Azizian-Kalandaragh Y. The influence of the physicochemical processes on the electrical response of Al/p-Si structure with etched surface. Applied Physics A. 2024;130(4). doi:10.1007/s00339-024-07393-y

BibTeX
@article{Badali2024,
  author = {Badali, Yosef and Azizian-Kalandaragh, Yashar},
  title = {The influence of the physicochemical processes on the electrical response of Al/p-Si structure with etched surface},
  journal = {Applied Physics A},
  year = {2024},
  volume = {130},
  number = {4},
  doi = {10.1007/s00339-024-07393-y}
}
Kostenlos starten →