EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Alumina-doped polyvinyl alcohol/chitosan beads for copper (II) adsorption: synthesis, characterization and performance study

Mehtap Ozekmekci

Polymer Bulletin · 2026-08 · 83 (8)

DOI: 10.1007/s00289-026-06475-6 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymer Bulletin, online erschienen am 26.05.2026. Verfasst von Mehtap Ozekmekci. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 102 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Bursa Technical University.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The present study evaluates the potential of polyvinyl alcohol (PVA)/chitosan (CS)-Alumina bead as an adsorbent for Cu (II) ions removal from an aqueous solution. Detailed structural, morphological, thermal, crystal and, surface analysis of bead was examined utilizing Fourier infrared spectroscopy (FTIR), scanning electron microscopy (SEM), thermogravimetric analysis (TGA), X-ray diffractogram (XRD) and Surface Area and Pore Size Analyzer, respectively. Batch adsorption experiments were conducted to investigate the effect of various factors such as initial copper concentration (25–200 ppm), contact time (0–600 min), adsorbent dose (0.1–0.3 g), pH of the solution (2–7) and temperature of the medium (25–45 °C). The experimental findings demonstrated that under favorable conditions (pH of 5, time of 360 min, adsorbent dose of 0.2, initial copper concentration of 25 ppm, and temperature of 45 °C), the removal efficiency was found to be 96.5%. The Langmuir model exhibited R 2 value of 0.99, indicating a strong correlation between the model and experimental data. This finding suggest that maximum adsorption capacity is 80 mg/g. The adsorption characteristics of the PVA/CS-Alumina bead were explained using a pseudo second-order kinetic model. The enthalpy change (18.90 kJ/mol) and entropy change (0.131 J/mol. K) were also determined from the temperature dependence, and the results demonstrated that the adsorption process is spontaneous and endothermic. The adsorption mechanism is explained by weak surface complexation and physical adsorption interactions as well as because the high surface area provides accessible active sites. The adsorbent showed good performance in the usability test, with 68.12% removal determined after the sixth usage. This finding indicated that PVA/CS-Alumina bead can be an effective material for the removal of copper.

Förderung

  • Bursa Technical University

Zitieren

APA

Ozekmekci, M. (2026). Alumina-doped polyvinyl alcohol/chitosan beads for copper (II) adsorption: synthesis, characterization and performance study. Polymer Bulletin, 83(8). https://doi.org/10.1007/s00289-026-06475-6

Vancouver

Ozekmekci M. Alumina-doped polyvinyl alcohol/chitosan beads for copper (II) adsorption: synthesis, characterization and performance study. Polymer Bulletin. 2026;83(8). doi:10.1007/s00289-026-06475-6

BibTeX
@article{Ozekmekci2026,
  author = {Ozekmekci, Mehtap},
  title = {Alumina-doped polyvinyl alcohol/chitosan beads for copper (II) adsorption: synthesis, characterization and performance study},
  journal = {Polymer Bulletin},
  year = {2026},
  volume = {83},
  number = {8},
  doi = {10.1007/s00289-026-06475-6}
}
Kostenlos starten →