EUVIMEDEUVIMED entdecken
Crossref

Synthesis, characterization and thermal studies of NIR fluorescent probe based on poly(anthranilicacid)/sand nanocomposite

R. Anbarasan, M. Kenet Nancy Mary, A. Jancirani, R. Baskaran, S. Hanish Anand

Polymer Bulletin · 2024-10 · 81 (15) · 14083-14104

DOI: 10.1007/s00289-024-05375-x ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymer Bulletin, online erschienen am 27.06.2024. Verfasst von R. Anbarasan und 4 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 51 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Electrically conducting polymers are increasingly being used as NIR fluorescence probes in the area of biomedical engineering via the application of a structural modification process. Peroxydisulphate (PDS) initiated the chemical polymerization process of anthranilicacid (AnA) in a nitrogen atmosphere at a temperature of 0–5 °C. Rosebengal (RB) was used as an end capping agent, and vigorous stirring was maintained with and without sand. The produced polymer and its nanocomposite were examined using instruments for UV–visible, TGA, DSC, SEM, EDX, FTIR, CV, FES, HRTEM, and XRD. The thermal stability of the resulting polymers was investigated using non-isothermal degradation kinetics. Additionally, the thermodynamic parameter values were determined. In the 3% weight Sand loaded PAnA system, a conductivity value of 4.31 × 10−2 S/cm was recorded, signifying a 90.3% yield percentage. Sand was added, and this resulted in an increase in the rate of polymerization (Rp) of anthranilicacid to 1.8 × 10–4 mol/lit/sec. A peak at 507 cm−1 in the FTIR spectrum confirmed the metal-oxide stretching of nano Sand. The PAnA/sand nanocomposite system has a higher photo-conversion efficiency of 1.49 percent as compared to the RB end capped PAnA system. The UV–visible spectrum and emission spectrum showed peaks around 750 nm. The experimental results are scrutinized closely and compared to values reported in the literature.

Zitieren

APA

Anbarasan, R., Mary, M. K. N., Jancirani, A., Baskaran, R., & Anand, S. H. (2024). Synthesis, characterization and thermal studies of NIR fluorescent probe based on poly(anthranilicacid)/sand nanocomposite. Polymer Bulletin, 81(15), 14083-14104. https://doi.org/10.1007/s00289-024-05375-x

Vancouver

Anbarasan R, Mary MKN, Jancirani A, Baskaran R, Anand SH. Synthesis, characterization and thermal studies of NIR fluorescent probe based on poly(anthranilicacid)/sand nanocomposite. Polymer Bulletin. 2024;81(15):14083-14104. doi:10.1007/s00289-024-05375-x

BibTeX
@article{Anbarasan2024,
  author = {Anbarasan, R. and Mary, M. Kenet Nancy and Jancirani, A. and Baskaran, R. and Anand, S. Hanish},
  title = {Synthesis, characterization and thermal studies of NIR fluorescent probe based on poly(anthranilicacid)/sand nanocomposite},
  journal = {Polymer Bulletin},
  year = {2024},
  volume = {81},
  number = {15},
  pages = {14083--14104},
  doi = {10.1007/s00289-024-05375-x}
}
Kostenlos starten →