EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Characterization and evaluation of a novel polylactic acid-made bioreactor for large-scale adherent cell expansion

Björn Boshof, Alena Hüppner, Johanna Eichberg, Henning Reyer, Lukas Käßer, Anne Kölsch

Applied Microbiology and Biotechnology · 2026

DOI: 10.1007/s00253-026-13880-4 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Applied Microbiology and Biotechnology, 2026. Verfasst von Björn Boshof und 5 weiteren Autor:innen. Beteiligte Einrichtung: Green Elephant Biotech GmbH, Giessen, Germany. bjoern@greenebt.com. Hauptthemen laut MEDLINE: Bioreactors, Cell Culture Techniques, Polyesters. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 48 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: LOEWE - Landes-Offensive zur Entwicklung Wissenschaftlich-ökonomischer Exzellenz, Förderlinie 3: KMU-Verbundvorhaben (State Offensive for the Development of Sc…, German Research Allowance (Forschungszulage) under the Act on Tax Incentives for Research and Development (Forschungszulagengesetz - FZulG), LOEWE – Landes-Offensive zur Entwicklung Wissenschaftlich-ökonomischer Exzellenz, Förderlinie 3: KMU-Verbundvorhaben.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Efficient large-scale expansion of adherent mammalian cells is essential for the production of recombinant proteins, viral vectors, and vaccines. Conventional multilayer flasks rely on scale-out approaches, require extensive manual handling, and lack monitoring process control compared to bioreactors. Here, we evaluate the CellScrew®, a dynamic 2D culture system available in three sizes ranging from 851 to 10,197 cm 2 , in which cell culture surfaces are continuously rotated, generating controlled hydrodynamic conditions that enhance mass transfer while reducing material consumption. Hydrodynamic conditions and oxygen transfer were characterized, with k L a values up to 6.69 ± 0.10 h −1 . In this context, we assessed cell attachment, proliferation, metabolism, and harvest performance using human embryonic kidney 293 (HEK-293), murine melanoma (B16-F10), and murine colon carcinoma (CT-26 WT) cells, which serve as established model systems for biotherapeutic manufacturing applications such as viral vectors and vaccine production. The system supported cell densities up to 7.7 × 10E5 cells per cm 2 (HEK-293), 8.7 × 10E4 cells per cm 2 (B16-F10), and 1.1 × 10E5 cells per cm 2 (CT-26 WT) with viabilities above 92%, comparable to multilayer flasks. Glucose consumption and lactate accumulation indicated stable metabolic activity. Mechanical harvesting enabled recovery efficiencies exceeding 89% while reducing detachment reagent usage by 67%. Overall, these results suggest that the CellScrew® can support robust adherent cell expansion with potential improvements in process efficiency and reduced resource consumption, indicating that it may represent a scalable and potentially more sustainable alternative to traditional multilayer platforms. Key points • CellScrew® reaches up to 0.77 ± 0.14 × 10E6 cells per cm 2 (cell-line dependent). • Harvest efficiency with 67% less detachment reagent use. • High oxygen transfer (kLa up to 6.69 ± 0.10 h−1) enables efficient culture.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

BioreactorsCell Culture TechniquesPolyestersHumansAnimalsMiceCell ProliferationHEK293 CellsCell AdhesionGlucoseCell Line, TumorCell SurvivalOxygen

Stichwörter der Autor:innen

B16-F10 cellsCT-26 WT cellsHEK-293 cellsLarge-scale cell culturePolylactic acidSustainable bioprocessing

Substanzen

Polyesterspoly(lactide)GlucoseOxygen

Autor:innen und Institutionen

  • Green Elephant Biotech GmbH, Giessen, Germany. bjoern@greenebt.com.
  • TRON - Translational Oncology at the University Medical Center of the Johannes Gutenberg University gGmbH, Mainz, Germany.
  • Green Elephant Biotech GmbH, Giessen, Germany.
  • TRON - Translational Oncology at the University Medical Center of the Johannes Gutenberg University gGmbH, Mainz, Germany. Anne.Koelsch@trOn-Mainz.de.

Förderung

  • LOEWE - Landes-Offensive zur Entwicklung Wissenschaftlich-ökonomischer Exzellenz, Förderlinie 3: KMU-Verbundvorhaben (State Offensive for the Development of Sc…
  • German Research Allowance (Forschungszulage) under the Act on Tax Incentives for Research and Development (Forschungszulagengesetz - FZulG)
  • LOEWE – Landes-Offensive zur Entwicklung Wissenschaftlich-ökonomischer Exzellenz, Förderlinie 3: KMU-Verbundvorhaben

Zitieren

APA

Boshof, B., Hüppner, A., Eichberg, J., Reyer, H., Käßer, L., & Kölsch, A. (2026). Characterization and evaluation of a novel polylactic acid-made bioreactor for large-scale adherent cell expansion. Applied Microbiology and Biotechnology. https://doi.org/10.1007/s00253-026-13880-4

Vancouver

Boshof B, Hüppner A, Eichberg J, Reyer H, Käßer L, Kölsch A. Characterization and evaluation of a novel polylactic acid-made bioreactor for large-scale adherent cell expansion. Applied Microbiology and Biotechnology. 2026. doi:10.1007/s00253-026-13880-4

BibTeX
@article{Boshof2026,
  author = {Boshof, Björn and Hüppner, Alena and Eichberg, Johanna and Reyer, Henning and Käßer, Lukas and Kölsch, Anne},
  title = {Characterization and evaluation of a novel polylactic acid-made bioreactor for large-scale adherent cell expansion},
  journal = {Applied Microbiology and Biotechnology},
  year = {2026},
  doi = {10.1007/s00253-026-13880-4}
}
Kostenlos starten →