Numerical study on condensation heat transfer process of wet flue gas containing non-condensable gases in a horizontal tube
Heat and Mass Transfer · 2026-06 · 62 (6)
DOI: 10.1007/s00231-026-03696-3 ↗Kurz gefasst
Fachartikel in der Zeitschrift Heat and Mass Transfer, online erschienen am 06.06.2026. Verfasst von Zhen Xu und 5 weiteren Autor:innen. Die Arbeit nennt 34 Literaturangaben. Gefördert von: Natural Science Foundation of Guangdong Province, National Natural Science Foundation of China.
Abstract (Originalsprache)
To effectively recover waste heat from wet flue gas emitted by gas-fired boilers, a clear understanding of condensation heat transfer and the associated flow resistance is required. In this work, a three-dimensional CFD study is conducted to investigate in-tube condensation of wet flue gas in a horizontal tube, and the numerical model is validated against steady experimental data. The wet flue gas is represented by a steam–air mixture, where dry air is used as a practical surrogate for the lumped non-condensable gases (NCGs) in real flue gas, and the moisture level is controlled by adjusting the steam content. The effects of Reynolds number, humidity ratio, wall subcooling, gas superheat, and length-to-diameter ratio (L/D) on condensation heat transfer and pressure drop are systematically analyzed. The results show that increasing the humidity ratio significantly enhances condensation heat transfer: when the humidity ratio increases from 0.05 to 0.2 kg∙kga−1, the heat-transfer factor increases by an average of 5.94%. Increases in Reynolds number and gas superheat further promote condensation heat transfer but also intensify flow losses, with the impact of gas superheat being comparatively minor. By contrast, increasing wall subcooling raises the overall thermal resistance and suppresses heat transfer. Tube geometry exerts a pronounced influence: when L/D increases from 30 to 48, the heat-transfer factor and friction factor increase by an average of 64.09% and 467%, respectively. The results also show that condensation in a horizontal tube is governed by the coupled effects of liquid-film growth, near-wall accumulation of non-condensable gases, and circumferential asymmetry caused by gravity. These findings help to explain the thermal-hydraulic trade-off observed under different operating and geometric conditions, and provide a basis for the design of wet flue gas condensers.
Förderung
- Natural Science Foundation of Guangdong Province
- National Natural Science Foundation of China
Zitieren
APA
Xu, Z., Su, C., Zhang, L., Xie, Y., Zhu, J., & Xie, Y. (2026). Numerical study on condensation heat transfer process of wet flue gas containing non-condensable gases in a horizontal tube. Heat and Mass Transfer, 62(6). https://doi.org/10.1007/s00231-026-03696-3
Vancouver
Xu Z, Su C, Zhang L, Xie Y, Zhu J, Xie Y. Numerical study on condensation heat transfer process of wet flue gas containing non-condensable gases in a horizontal tube. Heat and Mass Transfer. 2026;62(6). doi:10.1007/s00231-026-03696-3
BibTeX
@article{Xu2026,
author = {Xu, Zhen and Su, Chuanyun and Zhang, Linjie and Xie, Yingchu and Zhu, Jinchi and Xie, Yingchun},
title = {Numerical study on condensation heat transfer process of wet flue gas containing non-condensable gases in a horizontal tube},
journal = {Heat and Mass Transfer},
year = {2026},
volume = {62},
number = {6},
doi = {10.1007/s00231-026-03696-3}
}
EUVIMED