EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Local temperature distribution of a plate heat exchanger undergoing crystallization fouling

Jure Berce, Matevž Zupančič, Matic Može, Iztok Golobič

Heat and Mass Transfer · 2025-08 · 61 (8)

DOI: 10.1007/s00231-025-03593-1 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Heat and Mass Transfer, online erschienen am 31.07.2025. Verfasst von Jure Berce und 3 weiteren Autor:innen. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 17 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: The Slovenian Research and Innovation Agency.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The compact design of plate heat exchangers prevents local insights during system operation, which would be desired when designing for and evaluating a given fouling problem. Severe foulant build-up is often confined to specific regions within the flow channel geometry and could be mitigated to an extent by managing the distribution of flow if areas with high susceptibility towards fouling could be identified. We conducted laboratory crystallization fouling experiments on a counter-current brazed plate heat exchanger, coupling real-time measurements of flow rates and temperatures with infrared thermography. This non-intrusive method of spatiotemporal plate temperature characterization allowed local detection and evaluation of severely fouled areas within the upper channel. In the investigated case, the highest susceptibility towards salt crystallization was observed in the flow stagnation zone near the hot outlet, where the largest temperature gradient between both fluids was present and the driving supersaturation was largest. Apart from its use in future plate heat exchanger design, the presented approach can be coupled with computational fluid dynamics simulations, as was illustrated in this work.

Förderung

  • The Slovenian Research and Innovation Agency

Zitieren

APA

Berce, J., Zupančič, M., Može, M., & Golobič, I. (2025). Local temperature distribution of a plate heat exchanger undergoing crystallization fouling. Heat and Mass Transfer, 61(8). https://doi.org/10.1007/s00231-025-03593-1

Vancouver

Berce J, Zupančič M, Može M, Golobič I. Local temperature distribution of a plate heat exchanger undergoing crystallization fouling. Heat and Mass Transfer. 2025;61(8). doi:10.1007/s00231-025-03593-1

BibTeX
@article{Berce2025,
  author = {Berce, Jure and Zupančič, Matevž and Može, Matic and Golobič, Iztok},
  title = {Local temperature distribution of a plate heat exchanger undergoing crystallization fouling},
  journal = {Heat and Mass Transfer},
  year = {2025},
  volume = {61},
  number = {8},
  doi = {10.1007/s00231-025-03593-1}
}
Kostenlos starten →