A laboratory method to determine 3D fibre orientation around knots in sawn timber: case study on a Douglas fir specimen
Wood Science and Technology · 2024-11 · 58 (5-6) · 1735-1760
DOI: 10.1007/s00226-024-01583-w ↗Kurz gefasst
Fachartikel in der Zeitschrift Wood Science and Technology, online erschienen am 09.08.2024. Verfasst von Helene Penvern und 6 weiteren Autor:innen. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 39 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Agence Nationale de la Recherche, Stiftelsen för Kunskaps- och Kompetensutveckling, Arts et Metiers Institute of Technology.
Abstract (Originalsprache)
The mechanical properties of structural timber largely depend on the occurrence of knots and on fibre deviation in their vicinities. In recent strength grading machines, lasers and cameras are used to detect surface characteristics such as the size and position of knots and local fibre orientation. Since laser dot scanning only gives reliable information about the fibre orientation in the plane of board surfaces, simple assumptions are usually made to define the inner fibre orientation to model timber boards. Those models would be improved by better insight into real fibre deviation around knots. In the present work, a laboratory method is developed to evaluate growth layers geometries and fibre orientation, solely based on the fact that the fibers are parallel to the tree rings and without any further assumptions. The method simply relies on color scans and laser dot scans of Douglas fir ( Pseudotsuga menziesii ) timber specimen sections revealed by successive planing. The proposed method provides data on fibre orientation in 3D with an accuracy that is relevant for the calibration of detailed models.
Förderung
- Agence Nationale de la Recherche
- Stiftelsen för Kunskaps- och Kompetensutveckling
- Arts et Metiers Institute of Technology
Zitieren
APA
Penvern, H., Demoulin, L., Pot, G., Viguier, J., Roux, B., Hu, M., & Olsson, A. (2024). A laboratory method to determine 3D fibre orientation around knots in sawn timber: case study on a Douglas fir specimen. Wood Science and Technology, 58(5-6), 1735-1760. https://doi.org/10.1007/s00226-024-01583-w
Vancouver
Penvern H, Demoulin L, Pot G, Viguier J, Roux B, Hu M, et al. A laboratory method to determine 3D fibre orientation around knots in sawn timber: case study on a Douglas fir specimen. Wood Science and Technology. 2024;58(5-6):1735-1760. doi:10.1007/s00226-024-01583-w
BibTeX
@article{Penvern2024,
author = {Penvern, Helene and Demoulin, Leyne and Pot, Guillaume and Viguier, Joffrey and Roux, Benjamin and Hu, Min and Olsson, Anders},
title = {A laboratory method to determine 3D fibre orientation around knots in sawn timber: case study on a Douglas fir specimen},
journal = {Wood Science and Technology},
year = {2024},
volume = {58},
number = {5-6},
pages = {1735--1760},
doi = {10.1007/s00226-024-01583-w}
}
EUVIMED