Fabrication and installation of a flexible polydimethylsiloxane (PDMS) porous membrane as a substitute for a rigid, conventional, track-etched polyethylene terephthalate (PET) membrane on cell culture inserts for gut barrier co-culture
Analytical and Bioanalytical Chemistry · 2025-12 · 417 (30) · 7059-7068
DOI: 10.1007/s00216-025-06202-6 ↗Kurz gefasst
Fachartikel in der Zeitschrift Analytical and Bioanalytical Chemistry, online erschienen am 01.11.2025. Verfasst von Fumina Ichibakase und 2 weiteren Autor:innen. Beteiligte Einrichtung: Department of Applied Chemistry, Graduate School of Engineering, Kyushu University, 744 Motooka, Nishi-Ku, Fukuoka, 819-0395, Japan. Hauptthemen laut MEDLINE: Dimethylpolysiloxanes, Polyethylene Terephthalates, Membranes, Artificial. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 17 Literaturangaben. Gefördert von: Japan Society for the Promotion of Science, Mishima Kaiun Memorial Foundation.
Abstract (Originalsprache)
We report a simple, clean-room-free strategy for fabricating an ultrathin (≈ 5 µm) and highly flexible polydimethylsiloxane (PDMS) porous membrane that functions as a mechanically dynamic scaffold for an intestine-on-a-chip platform capable of co-culturing human epithelial cells and gut bacteria. The membrane is produced by a two-dimensional phase separation process in which polystyrene (PS) of defined molecular weight (MW = 1300-170,000) acts as the sacrificial layer in a PDMS/toluene matrix. Systematic variation of phase separation time (3-24 h), PS molecular weight, and PS:PDMS:toluene mixing ratio revealed that PS of MW = 5780 at a 1:7.5:7.5 weight ratio generated through pores 10-100 µm in diameter, whereas PS of MW = 1300 yielded sub-2 µm pores but required optimization to secure pore continuity. Scanning electron microscopy images confirmed homogeneous lateral distribution of the pores and negligible surface collapse after sacrificial removal of PS by overnight toluene extraction and subsequent thermal curing. Fluorescein permeability assays demonstrated that membranes fabricated with PS of MW = 5780 or 1300 displayed solute transport rates that showed a similar trend to 1.0 µm track-etched polyethylene terephthalate (PET) inserts at 12 h, underscoring successful formation of through pores despite an order of magnitude reduction in overall thickness. Importantly, Caco-2 colon epithelial cells adhered, proliferated, and formed confluent monolayers within 7 days on collagen-coated PDMS membranes, whereas confluent cultures on PET required 10 days. Long-term culture experiments (up to 18 days in our setting) highlighted contrasting behaviors: cells cultured on the larger-pore (10-100 µm) membranes detached after ≈13 days, likely due to accumulation of autocrine inhibitors on the impermeable basal side; in contrast, cells on the smaller pore (≈2 µm) PDMS membranes remained viable, although some cells migrated through the membrane to the lower chamber, illustrating the need to match pore size distribution to cell diameter. The present methodology eliminates photolithography and plasma bonding steps commonly associated with PDMS microfabrication and can be completed with benchtop spin coating and solvent-casting equipment in
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- Department of Applied Chemistry, Graduate School of Engineering, Kyushu University, 744 Motooka, Nishi-Ku, Fukuoka, 819-0395, Japan.
- Department of Applied Chemistry, Graduate School of Engineering, Kyushu University, 744 Motooka, Nishi-Ku, Fukuoka, 819-0395, Japan. kaji@cstf.kyushu-u.ac.jp.
- Institute of Nano-Life-Systems, Institutes of Innovation for Future Society, Nagoya University, Furo-Cho, Chikusa-Ku, Nagoya, 464-8603, Japan. kaji@cstf.kyushu-u.ac.jp.
Förderung
- Japan Society for the Promotion of Science
- Mishima Kaiun Memorial Foundation
Zitieren
APA
Ichibakase, F., Naito, T., & Kaji, N. (2025). Fabrication and installation of a flexible polydimethylsiloxane (PDMS) porous membrane as a substitute for a rigid, conventional, track-etched polyethylene terephthalate (PET) membrane on cell culture inserts for gut barrier co-culture. Analytical and Bioanalytical Chemistry, 417(30), 7059-7068. https://doi.org/10.1007/s00216-025-06202-6
Vancouver
Ichibakase F, Naito T, Kaji N. Fabrication and installation of a flexible polydimethylsiloxane (PDMS) porous membrane as a substitute for a rigid, conventional, track-etched polyethylene terephthalate (PET) membrane on cell culture inserts for gut barrier co-culture. Analytical and Bioanalytical Chemistry. 2025;417(30):7059-7068. doi:10.1007/s00216-025-06202-6
BibTeX
@article{Ichibakase2025,
author = {Ichibakase, Fumina and Naito, Toyohiro and Kaji, Noritada},
title = {Fabrication and installation of a flexible polydimethylsiloxane (PDMS) porous membrane as a substitute for a rigid, conventional, track-etched polyethylene terephthalate (PET) membrane on cell culture inserts for gut barrier co-culture},
journal = {Analytical and Bioanalytical Chemistry},
year = {2025},
volume = {417},
number = {30},
pages = {7059--7068},
doi = {10.1007/s00216-025-06202-6}
}
EUVIMED