Challenges of cannabidiol determination in emulsified cosmetics and application of solid-phase extraction followed by HPLC-UV-MS/MS
Analytical and Bioanalytical Chemistry · 2025
DOI: 10.1007/s00216-024-05716-9 ↗Kurz gefasst
Fachartikel in der Zeitschrift Analytical and Bioanalytical Chemistry, 2025. Verfasst von Magdaléna Vágnerová und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Analytical Chemistry, University of Chemistry and Technology, Technická 5, 166 28, Prague 6, Prague, Czech Republic. Hauptthemen laut MEDLINE: Tandem Mass Spectrometry, Solid Phase Extraction, Cannabidiol, Cosmetics. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 25 Literaturangaben. Gefördert von: Ministerstvo Vnitra České Republiky.
Abstract (Originalsprache)
The recent surge in popularity of cannabidiol-infused products extends beyond food and supplements to the cosmetic industry. Accurate labeling remains a significant concern, as many products fail to meet advertised cannabidiol content and/or contain psychoactive tetrahydrocannabinol above the permissible levels. In this work, we present the use of an HPLC-UV-MS/MS method for the quantification of five major cannabinoids (cannabidiol, cannabidiolic acid, tetrahydrocannabinol, tetrahydrocannabinolic acid, and cannabigerol) in oil-in-water cosmetic emulsions. The sample extraction is based on dispersing the sample in isopropanol, followed by solid-phase extraction using Bond Elut Plexa PAX cartridge. The viability of this method is demonstrated by comparing matrix effects in samples subjected to solid-phase extraction (0‒11% suppression of cannabidiol ionization) to samples extracted without additional purification steps (0‒84% ionization suppression of cannabidiol ionization). The limit of quantification is determined at 0.1 mg/g and the calibration is employed in the range of 0.1‒50 mg/g for cannabidiol and 0.1‒10 mg/g for all other analytes. Finally, 36 real cosmetic samples from the Czech market were analyzed. Of these, 14 indicated the amount of CBD on the label but only five (36%) were accurate, i.e., within 90‒110% of the labeled amount, and a considerable amount of THC (0.16 ± 0.01 mg/g) was found in one sample. These findings contribute to the cumulating evidence that cannabidiol-based consumer products are often mislabeled and highlight the importance of better regulatory compliance.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- Department of Analytical Chemistry, University of Chemistry and Technology, Technická 5, 166 28, Prague 6, Prague, Czech Republic.
- Forensic Laboratory of Biologically Active Substances, Department of Chemistry of Natural Compounds, University of Chemistry and Technology, Technická 5, 166 28, Prague 6, Prague, Czech Republic.
- Department of Analytical Chemistry, University of Chemistry and Technology, Technická 5, 166 28, Prague 6, Prague, Czech Republic. alzbeta.nemeskalova@vscht.cz.
- Forensic Laboratory of Biologically Active Substances, Department of Chemistry of Natural Compounds, University of Chemistry and Technology, Technická 5, 166 28, Prague 6, Prague, Czech Republic. kuchara@vscht.cz.
Förderung
- Ministerstvo Vnitra České Republiky
Zitieren
APA
Vágnerová, M., Sýkora, D., Nemeškalová, A., & Kuchař, M. (2025). Challenges of cannabidiol determination in emulsified cosmetics and application of solid-phase extraction followed by HPLC-UV-MS/MS. Analytical and Bioanalytical Chemistry. https://doi.org/10.1007/s00216-024-05716-9
Vancouver
Vágnerová M, Sýkora D, Nemeškalová A, Kuchař M. Challenges of cannabidiol determination in emulsified cosmetics and application of solid-phase extraction followed by HPLC-UV-MS/MS. Analytical and Bioanalytical Chemistry. 2025. doi:10.1007/s00216-024-05716-9
BibTeX
@article{Vgnerov2025,
author = {Vágnerová, Magdaléna and Sýkora, David and Nemeškalová, Alžběta and Kuchař, Martin},
title = {Challenges of cannabidiol determination in emulsified cosmetics and application of solid-phase extraction followed by HPLC-UV-MS/MS},
journal = {Analytical and Bioanalytical Chemistry},
year = {2025},
doi = {10.1007/s00216-024-05716-9}
}
EUVIMED