EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Thermo-mechanical behaviour, constitutive modelling, and processing maps of 32CrB4 steel under warm forming conditions

Eduardo García Gil, Roberto ElviraElguizabal, Raquel Nalda Berganza, Beatriz Achiaga Menor, Alberto Murillo-Marrodán

The International Journal of Advanced Manufacturing Technology · 20.11.2026

DOI: 10.1007/s00170-026-19538-9 ↗

Kurz gefasst

Fachartikel in der Zeitschrift The International Journal of Advanced Manufacturing Technology, online erschienen am 20.11.2026. Verfasst von Eduardo García Gil und 4 weiteren Autor:innen. Die Arbeit nennt 40 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ekonomiaren Garapen eta Lehiakortasun Saila, Eusko Jaurlaritza.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The decarbonization of industrial forming processes is a major challenge for large-scale steel component manufacturing. One promising strategy is the reduction of forming temperatures to lower heating energy consumption and CO₂ emissions. This study investigates the thermo-mechanical behaviour of 32CrB4 steel, a boron-alloyed material commonly used in high-strength fasteners for offshore wind turbines, under warm forming conditions (800–1100 °C, strain rates of 0.1–10 s⁻¹). Isothermal compression tests were conducted and used to develop an Arrhenius-type constitutive model, both peak-stress-based and strain-compensated, achieving a prediction accuracy with an average absolute relative error (AARE) of 5.26%. Additionally, processing maps based on the Dynamic Material Model were generated, identifying a safe and efficient forming window between 950 °C and 1000 °C at strain rates below 1 s⁻¹, where dynamic recrystallization (DRX) dominates, and flow instability is minimized. These findings provide quantitative and practical guidelines for the development of low-carbon, energy-efficient forming routes suitable for large wind turbine offshore components.

Förderung

  • Ekonomiaren Garapen eta Lehiakortasun Saila, Eusko Jaurlaritza

Zitieren

APA

Gil, E. G., ElviraElguizabal, R., Berganza, R. N., Menor, B. A., & Murillo-Marrodán, A. (2026). Thermo-mechanical behaviour, constitutive modelling, and processing maps of 32CrB4 steel under warm forming conditions. The International Journal of Advanced Manufacturing Technology. https://doi.org/10.1007/s00170-026-19538-9

Vancouver

Gil EG, ElviraElguizabal R, Berganza RN, Menor BA, Murillo-Marrodán A. Thermo-mechanical behaviour, constitutive modelling, and processing maps of 32CrB4 steel under warm forming conditions. The International Journal of Advanced Manufacturing Technology. 2026. doi:10.1007/s00170-026-19538-9

BibTeX
@article{Gil2026,
  author = {Gil, Eduardo García and ElviraElguizabal, Roberto and Berganza, Raquel Nalda and Menor, Beatriz Achiaga and Murillo-Marrodán, Alberto},
  title = {Thermo-mechanical behaviour, constitutive modelling, and processing maps of 32CrB4 steel under warm forming conditions},
  journal = {The International Journal of Advanced Manufacturing Technology},
  year = {2026},
  doi = {10.1007/s00170-026-19538-9}
}
Kostenlos starten →