An integrated multi-stage pipeline for precision tool manufacturing process modelling and optimization under multi-objective constraints
The International Journal of Advanced Manufacturing Technology · 12.11.2026
DOI: 10.1007/s00170-026-19459-7 ↗Kurz gefasst
Fachartikel in der Zeitschrift The International Journal of Advanced Manufacturing Technology, online erschienen am 12.11.2026. Verfasst von Muhammad Umar Farooq und 1 weiteren Autor:innen. Die Arbeit nennt 45 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Form-tool manufacture from high-speed steel remains difficult because productivity, surface quality, and dimensional accuracy must be achieved simultaneously in a hard-to-machine geometry. This study addressed that problem through wire electrical discharge machining (WEDM) of a tapered high-speed-steel (HSS) forming-tool profile using a full-factorial design and an Artificial Intelligence for Manufacturing Process Optimization and Design (AIMPOD) workflow that integrates surrogate modelling, explainability, and multi-stage optimization. Material removal rate (MRR), surface roughness, and four angular-error responses were modelled using response-specific surrogates. The results showed that material thickness was the dominant productivity factor, with a correlation coefficient of $$r = 0.97$$ with MRR and a 102.0% increase in mean MRR from 7.15 to 14.45 mm $$^3$$ min $$^{-1}$$ as thickness increased from 12.7 to 25.4 mm. In contrast, quality responses exhibited localized and response-specific behaviour; for example, the angular error $$e_2$$ increased by 46.1% with thickness, whereas the angular error $$e_4$$ decreased by 29.5% as open voltage increased from 85 to 105 V. Among the machine-learning models, SVR provided the best MRR prediction with test $$R^2 = 0.96$$ , RMSE $$= 0.63$$ mm $$^3$$ min $$^{-1}$$ , and MAE $$= 0.50$$ mm $$^3$$ min $$^{-1}$$ ; the optimized ensemble achieved RMSE $$= 0.6313$$ mm 3 min -1 and $$R^2 = 0.9592$$ . The framework identified candidate compromise solutions for simultaneous optimization of productivity, finish, and angular accuracy in toolmaking-relevant WEDM.
Zitieren
APA
Farooq, M. U., & Tlija, M. (2026). An integrated multi-stage pipeline for precision tool manufacturing process modelling and optimization under multi-objective constraints. The International Journal of Advanced Manufacturing Technology. https://doi.org/10.1007/s00170-026-19459-7
Vancouver
Farooq MU, Tlija M. An integrated multi-stage pipeline for precision tool manufacturing process modelling and optimization under multi-objective constraints. The International Journal of Advanced Manufacturing Technology. 2026. doi:10.1007/s00170-026-19459-7
BibTeX
@article{Farooq2026,
author = {Farooq, Muhammad Umar and Tlija, Mehdi},
title = {An integrated multi-stage pipeline for precision tool manufacturing process modelling and optimization under multi-objective constraints},
journal = {The International Journal of Advanced Manufacturing Technology},
year = {2026},
doi = {10.1007/s00170-026-19459-7}
}
EUVIMED