Kinetics and mechanisms of high-temperature oxidation of stainless steel 347LSi in synthetic air
The International Journal of Advanced Manufacturing Technology · 04.11.2026
DOI: 10.1007/s00170-026-19406-6 ↗Kurz gefasst
Fachartikel in der Zeitschrift The International Journal of Advanced Manufacturing Technology, online erschienen am 04.11.2026. Verfasst von Gleryston T. G. da Silva und 6 weiteren Autor:innen. Die Arbeit nennt 45 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Universidade Federal De Pernambuco.
Abstract (Originalsprache)
The high-temperature oxidation behavior of 347LSi stainless steel coatings is a critical factor for their application in aggressive environments. This study investigates the oxidation kinetics and mechanisms of coatings deposited by GMAW process on 2.25Cr–1Mo steel substrates, using different Ar–CO 2 shielding gas mixtures, in a synthetic air atmosphere at 800, 900, 1000, and 1100 °C. Thermogravimetric analysis revealed predominantly parabolic oxidation behavior for all conditions at times above 10 4 s, allowing the determination of parabolic rate constants (kₚ) and apparent activation energies (Eₐ). At 800 °C, the coatings exhibited low kₚ values and formed a compact and adherent bilayer oxide scale composed of an inner Cr 2 O 3 layer and an outer (Fe, Mn, Cr) 2 O 4 spinel, providing effective protection against oxidation. As the temperature increased to 900–1100 °C, a transition to accelerated oxidation was observed, associated with chromium depletion at the metal/oxide interface and the progressive breakdown of the protective chromia layer. This resulted in the formation of Fe-rich, porous, and poorly adherent oxides, promoting oxide spallation and loss of protective behavior. The shielding gas composition significantly influenced oxidation performance. The mixture containing 4% CO 2 exhibited the best overall behavior, combining lower oxidation rates with improved oxide stability, whereas higher CO 2 contents promoted faster degradation at elevated temperatures. These results demonstrate that oxidation resistance is maintained up to approximately 800 °C, while higher temperatures lead to a transition toward non-protective oxidation mechanisms. The findings highlight the critical role of shielding gas selection in controlling high-temperature oxidation and provide practical guidelines for the design of stainless steel coatings for demanding service conditions.
Förderung
- Universidade Federal De Pernambuco
Zitieren
APA
Silva, G. T. G. D., Araújo, H. R., Vicente, A. A., Santos, A. X., Santana, R. A. C. D., Torres-López, E. A., & Santos, T. F. A. (2026). Kinetics and mechanisms of high-temperature oxidation of stainless steel 347LSi in synthetic air. The International Journal of Advanced Manufacturing Technology. https://doi.org/10.1007/s00170-026-19406-6
Vancouver
Silva GTGD, Araújo HR, Vicente AA, Santos AX, Santana RACD, Torres-López EA, et al. Kinetics and mechanisms of high-temperature oxidation of stainless steel 347LSi in synthetic air. The International Journal of Advanced Manufacturing Technology. 2026. doi:10.1007/s00170-026-19406-6
BibTeX
@article{Silva2026,
author = {Silva, Gleryston T. G. da and Araújo, Helen R. and Vicente, André A. and Santos, Aureliano X. and Santana, Renato A. C. de and Torres-López, Edwar A. and Santos, Tiago Felipe A.},
title = {Kinetics and mechanisms of high-temperature oxidation of stainless steel 347LSi in synthetic air},
journal = {The International Journal of Advanced Manufacturing Technology},
year = {2026},
doi = {10.1007/s00170-026-19406-6}
}
EUVIMED