EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Hot compression behavior of advanced medium Mn steels: numerical and experimental investigation

Sebastian Sławski, Aleksandra Kozłowska, Wojciech Borek

The International Journal of Advanced Manufacturing Technology · 2026-09 · 146 (5-6) · 3975-3988

DOI: 10.1007/s00170-026-19029-x ↗

Kurz gefasst

Fachartikel in der Zeitschrift The International Journal of Advanced Manufacturing Technology, online erschienen am 28.08.2026. Verfasst von Sebastian Sławski und 2 weiteren Autor:innen. Die Arbeit nennt 51 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: Narodowe Centrum Badań i Rozwoju.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The hot compression behavior of advanced medium-Mn steels (3–5 wt% Mn) intended for forgings was investigated using a combined experimental and numerical approaches. Finite element method (FEM) simulations were performed based on material parameters identified from stress-strain curves obtained in hot compression tests using the Gleeble thermomechanical simulator. The tests were performed in the temperature range of 900–1100 °C at a strain rate of 0.5s-1. Color-coded maps of plastic strain distribution within the sample volume were obtained from the numerical simulations. The evolution of plastic strain in selected finite elements was analysed to monitor its changes and distribution within specific regions of the sample. The deformation behavior and yield stress of the investigated steels showed a strong dependence on temperature. At 1100 °C, dynamic recrystallization led to stress softening and the formation of a nearly equiaxed prior austenite grain (PAG).The deformation at 900 °C was governed by dynamic recovery resulting in strain hardening and a pancaked PAG morphology. The absence of dynamic recrystallization at the 900 °C was reflected in a continuous increase in von Mises stress. The grain size was significantly influenced by chemical composition. Higher Mn content promoting grain growth, while Ti and V microadditions effectively inhibit PAG coarsening. These findings provide insight into the interplay between hot deformation conditions and microstructural evolution and may support the optimization of forging processes for advanced medium-Mn steels.

Förderung

  • Narodowe Centrum Badań i Rozwoju

Zitieren

APA

Sławski, S., Kozłowska, A., & Borek, W. (2026). Hot compression behavior of advanced medium Mn steels: numerical and experimental investigation. The International Journal of Advanced Manufacturing Technology, 146(5-6), 3975-3988. https://doi.org/10.1007/s00170-026-19029-x

Vancouver

Sławski S, Kozłowska A, Borek W. Hot compression behavior of advanced medium Mn steels: numerical and experimental investigation. The International Journal of Advanced Manufacturing Technology. 2026;146(5-6):3975-3988. doi:10.1007/s00170-026-19029-x

BibTeX
@article{Sawski2026,
  author = {Sławski, Sebastian and Kozłowska, Aleksandra and Borek, Wojciech},
  title = {Hot compression behavior of advanced medium Mn steels: numerical and experimental investigation},
  journal = {The International Journal of Advanced Manufacturing Technology},
  year = {2026},
  volume = {146},
  number = {5-6},
  pages = {3975--3988},
  doi = {10.1007/s00170-026-19029-x}
}
Kostenlos starten →