Microstructural evolution and mechanical behavior of a ZnAlAg alloy using the severe plastic deformation technique
The International Journal of Advanced Manufacturing Technology · 2026-09 · 146 (5-6) · 3265-3276
DOI: 10.1007/s00170-026-18986-7 ↗Kurz gefasst
Fachartikel in der Zeitschrift The International Journal of Advanced Manufacturing Technology, online erschienen am 21.08.2026. Verfasst von Luis Ricardo Jacobo-Cisneros und 3 weiteren Autor:innen. Die Arbeit nennt 60 Literaturangaben. Gefördert von: Secretariat of Science, Humanities, Technology, and Innovation.
Abstract (Originalsprache)
Grain refinement is one of the strategies for improving the mechanical properties of metal alloys, and one of the most effective methods is severe plastic deformation (SPD), particularly the extrusion process (ECAP), as it allows large deformations to be induced in the material. This study analyzed the microstructural and mechanical evolution of a ZINAG alloy (74%Zn-22%Al-4%Ag) processed by ECAP. The alloy was obtained by casting and then heat-treated at 350 °C for 60 min, followed by quenching in water at room temperature. The ECAP process was carried out at room temperature following the Bc route, applying 2, 4, 6, and 8 deformation passes at a strain rate of 1.282 × 10⁻⁴ s⁻¹. The mechanical properties were evaluated using Vickers microhardness and tensile tests at a strain rate of 2.088 × 10⁻⁵ s⁻¹. Scanning electron microscopy (SEM) and X-ray diffraction (XRD) analyses showed significant grain refinement and the formation of AgZn₃ (ε) and Ag3Al (δ) intermetallic compounds, which may contribute to superplasticity close to 600%. Likewise, the required deformation stress and microhardness decreased with increasing number of passes, while the maximum elongation was obtained with four deformation passes. The ECAP process proved to be effective in optimizing the microstructure and superplastic properties of the 74%Zn-22%Al-4%Ag alloy.
Förderung
- Secretariat of Science, Humanities, Technology, and Innovation
Zitieren
APA
Jacobo-Cisneros, L. R., Garnica-González, P., Pacheco-Cedeño, J. S., & Machado-Lopez, M. M. (2026). Microstructural evolution and mechanical behavior of a ZnAlAg alloy using the severe plastic deformation technique. The International Journal of Advanced Manufacturing Technology, 146(5-6), 3265-3276. https://doi.org/10.1007/s00170-026-18986-7
Vancouver
Jacobo-Cisneros LR, Garnica-González P, Pacheco-Cedeño JS, Machado-Lopez MM. Microstructural evolution and mechanical behavior of a ZnAlAg alloy using the severe plastic deformation technique. The International Journal of Advanced Manufacturing Technology. 2026;146(5-6):3265-3276. doi:10.1007/s00170-026-18986-7
BibTeX
@article{JacoboCisneros2026,
author = {Jacobo-Cisneros, Luis Ricardo and Garnica-González, Pedro and Pacheco-Cedeño, José Sergio and Machado-Lopez, Mario Misael},
title = {Microstructural evolution and mechanical behavior of a ZnAlAg alloy using the severe plastic deformation technique},
journal = {The International Journal of Advanced Manufacturing Technology},
year = {2026},
volume = {146},
number = {5-6},
pages = {3265--3276},
doi = {10.1007/s00170-026-18986-7}
}
EUVIMED