EUVIMEDEUVIMED entdecken
Crossref

Three-dimensional molten pool simulation in amorphous alloy ribbon preparation via planar flow casting

Hongxin Ji, Jianliang Sun, Lijun Li, Deren Li

The International Journal of Advanced Manufacturing Technology · 2026-09 · 146 (5-6) · 3523-3534

DOI: 10.1007/s00170-026-18769-0 ↗

Kurz gefasst

Fachartikel in der Zeitschrift The International Journal of Advanced Manufacturing Technology, online erschienen am 24.08.2026. Verfasst von Hongxin Ji und 3 weiteren Autor:innen. Die Arbeit nennt 23 Literaturangaben. Gefördert von: Hebei Province Science and Technology Support Program.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

A three-dimensional (3D) volume of fluid (VOF) model was developed to simulate the air‑melt two‑phase flow during planar flow casting (PFC) of amorphous alloy ribbons, solving the continuity, momentum, and energy equations. The evolution of the molten pool morphology, temperature field, flow field, and interfacial heat transfer was systematically investigated. The results reveal that the molten pool size decreases from the center toward the periphery and with increasing proximity to the nozzle wall. The temperature is higher in the upstream and central regions than in the downstream and lateral regions. The melt velocity decreases with increasing distance from the roller surface, and the downstream airflow is more stable than the upstream airflow. The simulation results suggest that airflow-induced oscillation of the upstream meniscus may generate periodic fish-scale patterns at t = 0.6 ms, which subsequently disappear from the center toward the sides. Edge airflow entrains air-pockets into the peripheral molten pool, generating burrs and wrinkles along the casting direction. At steady state (10 ms), the ribbon thickness is 35.67 μm at the center and decreases to 34.12 μm at 2 mm from the center. The central region of the roller exhibits lower cooling efficiency due to thermal focusing. This work establishes a 3D framework for understanding the coupled multiphase flow and heat transfer phenomena in PFC, offering process‑based insights into fish‑scale pattern formation and edge defects.

Förderung

  • Hebei Province Science and Technology Support Program

Zitieren

APA

Ji, H., Sun, J., Li, L., & Li, D. (2026). Three-dimensional molten pool simulation in amorphous alloy ribbon preparation via planar flow casting. The International Journal of Advanced Manufacturing Technology, 146(5-6), 3523-3534. https://doi.org/10.1007/s00170-026-18769-0

Vancouver

Ji H, Sun J, Li L, Li D. Three-dimensional molten pool simulation in amorphous alloy ribbon preparation via planar flow casting. The International Journal of Advanced Manufacturing Technology. 2026;146(5-6):3523-3534. doi:10.1007/s00170-026-18769-0

BibTeX
@article{Ji2026,
  author = {Ji, Hongxin and Sun, Jianliang and Li, Lijun and Li, Deren},
  title = {Three-dimensional molten pool simulation in amorphous alloy ribbon preparation via planar flow casting},
  journal = {The International Journal of Advanced Manufacturing Technology},
  year = {2026},
  volume = {146},
  number = {5-6},
  pages = {3523--3534},
  doi = {10.1007/s00170-026-18769-0}
}
Kostenlos starten →