Unified geometric error modeling and cooperative calibration method for high precision dual-robot machining systems
The International Journal of Advanced Manufacturing Technology · 2026-07 · 145 (3-4) · 2541-2552
DOI: 10.1007/s00170-026-18476-w ↗Kurz gefasst
Fachartikel in der Zeitschrift The International Journal of Advanced Manufacturing Technology, online erschienen am 18.06.2026. Verfasst von Zhen Fan und 2 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 26 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Natural Science Foundation of Jiangsu Province, National Science and Technology Major Project of Jiangsu Province.
Abstract (Originalsprache)
In advanced manufacturing fields such as aerospace, achieving high-precision cooperative positioning for dual-robot systems remains a critical challenge. Conventional calibration methods usually treat geometric error sources separately and calibrate them step by step, which can cause residual errors from one stage to propagate into the next and makes it difficult to compensate coupled system errors. This paper proposes a unified calibration framework to address this limitation. The master robot, the slave robot, and the base-to-base relationship are modeled as a single continuous kinematic chain. Based on this unified model, a cooperative error Jacobian matrix is derived for 78 geometric error parameters, and the Levenberg–Marquardt algorithm is used for parameter identification. Experimental results show that the mean absolute positioning errors in the x, y, and z directions decreased from 1.386 mm, 1.361 mm, and 0.341 mm to 0.391 mm, 0.387 mm, and 0.245 mm, corresponding to reductions of 71.8%, 71.6%, and 28.2%, respectively. After calibration, the cooperative positioning error of the dual-robot system remained below 0.8 mm. These results indicate that the proposed method can support dual-robot machining and assembly tasks that require sub-millimeter cooperative positioning.
Förderung
- National Natural Science Foundation of China
- Natural Science Foundation of Jiangsu Province
- National Science and Technology Major Project of Jiangsu Province
Zitieren
APA
Fan, Z., Li, B., & Tian, W. (2026). Unified geometric error modeling and cooperative calibration method for high precision dual-robot machining systems. The International Journal of Advanced Manufacturing Technology, 145(3-4), 2541-2552. https://doi.org/10.1007/s00170-026-18476-w
Vancouver
Fan Z, Li B, Tian W. Unified geometric error modeling and cooperative calibration method for high precision dual-robot machining systems. The International Journal of Advanced Manufacturing Technology. 2026;145(3-4):2541-2552. doi:10.1007/s00170-026-18476-w
BibTeX
@article{Fan2026,
author = {Fan, Zhen and Li, Bo and Tian, Wei},
title = {Unified geometric error modeling and cooperative calibration method for high precision dual-robot machining systems},
journal = {The International Journal of Advanced Manufacturing Technology},
year = {2026},
volume = {145},
number = {3-4},
pages = {2541--2552},
doi = {10.1007/s00170-026-18476-w}
}
EUVIMED