EUVIMEDEUVIMED entdecken
Crossref

Optimization of WAAM-DED process production capacity using an air–water aerosol cooling system

Louise Burot, Emmanuel Bertrand, Laurent Couturier, Pascal Paillard, Grégoire Bazin

The International Journal of Advanced Manufacturing Technology · 2026-07 · 145 (3-4) · 1921-1932

DOI: 10.1007/s00170-026-18433-7 ↗

Kurz gefasst

Fachartikel in der Zeitschrift The International Journal of Advanced Manufacturing Technology, online erschienen am 09.06.2026. Verfasst von Louise Burot und 4 weiteren Autor:innen. Die Arbeit nennt 32 Literaturangaben. Gefördert von: Institut de Recherche Technologique Jules Verne.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Optimizing production capacity in Direct Energy Deposition (DED) processes such as Wire Arc Additive Manufacturing (WAAM) is constrained by thermal management, particularly when stacking beads at high deposition rates. Long interpass waiting times, required to prevent heat accumulation, drastically reduce production rates. This study evaluates the effectiveness of an air–water aerosol cooling system to accelerate heat dissipation during the fabrication of G3Si1 steel thin walls while preserving the structural and mechanical quality of the parts. Three configurations are compared: passive cooling with extended waiting times (reference), passive cooling with reduced interpass times (thermal accumulation), and active aerosol cooling with the same reduced interpass times. Results show that the aerosol significantly reduces interpass temperatures (from 500–600 °C to 200–400 °C) and minimizes geometric defects (sagging, collapse) while preserving mechanical properties (Charpy impact energy, hardness, tensile strength). Contrary to concerns, water use does not lead to hydrogen enrichment in the deposits. Effective production capacity is increased 16-fold compared to the reference, while maintaining acceptable metallurgical quality. This approach paves the way for adaptive thermal management, optimizing both production capacity and part quality in WAAM.

Förderung

  • Institut de Recherche Technologique Jules Verne

Zitieren

APA

Burot, L., Bertrand, E., Couturier, L., Paillard, P., & Bazin, G. (2026). Optimization of WAAM-DED process production capacity using an air–water aerosol cooling system. The International Journal of Advanced Manufacturing Technology, 145(3-4), 1921-1932. https://doi.org/10.1007/s00170-026-18433-7

Vancouver

Burot L, Bertrand E, Couturier L, Paillard P, Bazin G. Optimization of WAAM-DED process production capacity using an air–water aerosol cooling system. The International Journal of Advanced Manufacturing Technology. 2026;145(3-4):1921-1932. doi:10.1007/s00170-026-18433-7

BibTeX
@article{Burot2026,
  author = {Burot, Louise and Bertrand, Emmanuel and Couturier, Laurent and Paillard, Pascal and Bazin, Grégoire},
  title = {Optimization of WAAM-DED process production capacity using an air–water aerosol cooling system},
  journal = {The International Journal of Advanced Manufacturing Technology},
  year = {2026},
  volume = {145},
  number = {3-4},
  pages = {1921--1932},
  doi = {10.1007/s00170-026-18433-7}
}
Kostenlos starten →