Traceability-informed adaptation in wire arc additive manufacturing
The International Journal of Advanced Manufacturing Technology · 2026-06 · 144 (7-8) · 5201-5215
DOI: 10.1007/s00170-026-18119-0 ↗Kurz gefasst
Fachartikel in der Zeitschrift The International Journal of Advanced Manufacturing Technology, online erschienen am 27.04.2026. Verfasst von Ethan Kerber und 2 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 19 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: RWTH Aachen University.
Abstract (Originalsprache)
There is currently no standard framework for traceability to collect data documenting the variables which influence the quality of Wire Arc Additive Manufacturing (WAAM). This work presents a WAAM Information Model (WIM) to enable traceability-informed adaptation. The framework is validated through the printing of a reference geometry, to evaluate the capture of process parameters and assess the impact of a traceability-informed adaptive strategy. Without WIM-based adaptivity, the test printing failed at 15-20 layers. With WIM-based adaptivity, the print was extended to 50-60 layers. The information model tracked the printing process, capturing robot/welder/sensor state data in a hierarchical, structured, and bidirectionally accessible format at a frequency of 2 Hz (every 500 ms). Throughout the testing, 1,555 individual adaptive points with calculated layer heights were captured. The developed model provides modularity, extensibility, and accessibility, enabling access to comprehensive WAAM process analysis in academic research.
Förderung
- RWTH Aachen University
Zitieren
APA
Kerber, E., Sharma, R., & Brell-Cokcan, S. (2026). Traceability-informed adaptation in wire arc additive manufacturing. The International Journal of Advanced Manufacturing Technology, 144(7-8), 5201-5215. https://doi.org/10.1007/s00170-026-18119-0
Vancouver
Kerber E, Sharma R, Brell-Cokcan S. Traceability-informed adaptation in wire arc additive manufacturing. The International Journal of Advanced Manufacturing Technology. 2026;144(7-8):5201-5215. doi:10.1007/s00170-026-18119-0
BibTeX
@article{Kerber2026,
author = {Kerber, Ethan and Sharma, Rahul and Brell-Cokcan, Sigrid},
title = {Traceability-informed adaptation in wire arc additive manufacturing},
journal = {The International Journal of Advanced Manufacturing Technology},
year = {2026},
volume = {144},
number = {7-8},
pages = {5201--5215},
doi = {10.1007/s00170-026-18119-0}
}
EUVIMED