EUVIMEDEUVIMED entdecken
Crossref

Hybrid ultrasonic-assisted milling with internal cooling and ensemble machine learning for cutting-tool wear prediction in SKD11 hardened steel

Shen-Yung Lin, Zahid Abbas Shah, Hong-Xuan Peng

The International Journal of Advanced Manufacturing Technology · 2026-05 · 144 (1-2) · 689-707

DOI: 10.1007/s00170-026-17951-8 ↗

Kurz gefasst

Fachartikel in der Zeitschrift The International Journal of Advanced Manufacturing Technology, online erschienen am 30.03.2026. Verfasst von Shen-Yung Lin und 2 weiteren Autor:innen. Die Arbeit nennt 40 Literaturangaben. Gefördert von: National Science Council.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Machining of hardened SKD11 tool steel is a challenging task due to its high hardness and strength, which accelerates tool wear, increases cutting temperature, and deteriorates surface quality. Conventional cooling strategies are often insufficient to effectively control heat generation under high-speed milling conditions. To address these limitations, this study proposes an integrated hybrid machining strategy that combines ultrasonic-assisted milling with through-tool internal cooling to enhance heat dissipation and reduce friction at the cutting interface. The high-frequency, low-amplitude ultrasonic vibration induces intermittent tool-workpiece contact, consequently improving chip evacuation and minimizing adhesion, while internal cooling delivers coolant directly into the cutting zone for efficient temperature control. Comparative experiments conducted under Z-axis, XY-plane, and combined XYZ ultrasonic modes demonstrated that Z-axis ultrasonic assistance combined with internal cooling achieved the best performance, reducing surface roughness by 20–31% and cutting temperature by 15–28% compared to conventional milling. Additionally, multiple machine learning, models, including Decision Tree (DT), Random Forest (RF), and Adaptive Boosting (AdaBoost), were used to predict cutting tool wear. Among these, AdaBoost achieved the highest accuracy and precision (0.964) and F1-score (0.944), and its performance was further enhanced through a voting ensemble strategy. Unlike previous studies which considered vibration-assisted machining and data-driven monitoring method, this study integrates hybrid machining and intelligent prediction within a unified framework for hardened SKD11 tool steel, thereby contributing to smarter and more sustainable manufacturing.

Förderung

  • National Science Council

Zitieren

APA

Lin, S., Shah, Z. A., & Peng, H. (2026). Hybrid ultrasonic-assisted milling with internal cooling and ensemble machine learning for cutting-tool wear prediction in SKD11 hardened steel. The International Journal of Advanced Manufacturing Technology, 144(1-2), 689-707. https://doi.org/10.1007/s00170-026-17951-8

Vancouver

Lin S, Shah ZA, Peng H. Hybrid ultrasonic-assisted milling with internal cooling and ensemble machine learning for cutting-tool wear prediction in SKD11 hardened steel. The International Journal of Advanced Manufacturing Technology. 2026;144(1-2):689-707. doi:10.1007/s00170-026-17951-8

BibTeX
@article{Lin2026,
  author = {Lin, Shen-Yung and Shah, Zahid Abbas and Peng, Hong-Xuan},
  title = {Hybrid ultrasonic-assisted milling with internal cooling and ensemble machine learning for cutting-tool wear prediction in SKD11 hardened steel},
  journal = {The International Journal of Advanced Manufacturing Technology},
  year = {2026},
  volume = {144},
  number = {1-2},
  pages = {689--707},
  doi = {10.1007/s00170-026-17951-8}
}
Kostenlos starten →