EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Simultaneous dimension and tolerance design for robot manipulator considering cost and positioning accuracy reliability

Zhiwei Zhao, Yan Jin iD, Paul Goodall, Andrew West, Mark Price

The International Journal of Advanced Manufacturing Technology · 2026-04 · 143 (11-12) · 6509-6522

DOI: 10.1007/s00170-026-17862-8 ↗

Kurz gefasst

Fachartikel in der Zeitschrift The International Journal of Advanced Manufacturing Technology, online erschienen am 18.03.2026. Verfasst von Zhiwei Zhao und 4 weiteren Autor:innen. Beteiligte Einrichtung: School of mechanical and aerospace engineering, Queen's University Belfast, Belfast, UK. Die Arbeit nennt 30 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Engineering and Physical Sciences Research Council.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Tolerance allocation is an important design step for determining robot accuracy and directly affecting manufacturing cost. However, existing methods typically consider dimension synthesis first before tolerances are allocated, which neglects the manufacturability constraints arising from the dependency between part size and achievable tolerance grades. This often leads to costly iterations between design and manufacturing and increasing manufacturing cost. To address this issue, an integrated tolerance allocation and dimensional synthesis method of robot design is proposed for optimizing both positioning accuracy reliability and manufacturing cost. The method simultaneously optimizes joint dimensions and corresponding tolerances by formulating a cost function that captures the relationship between dimensional parameters, robot end-effector accuracy reliability, tolerance-grade rules, and manufacturing cost. Additionally, a matrix-based Monte Carlo simulation (MCS) method is introduced to accelerate evaluation workspace-wide reliability under tolerance uncertainty. NSGA-II multi-objective optimization algorithm is employed to find the Pareto front of the optimal solutions. A case study of a surgical robot is taken to demonstrate the effectiveness of the proposed approach. Results show that the proposed method can reduce 22% of manufacturing cost while achieving better positioning accuracy reliability compared to the traditional tolerance allocation method, and the speed of matrix-based MCS method is improved by 400 times compared to the point-based MCS method.

Schlagwörter

Stichwörter der Autor:innen

Manufacturing costPosition accuracyRobot designTolerance allocation

Autor:innen und Institutionen

  • School of mechanical and aerospace engineering, Queen's University Belfast, Belfast, UK.
  • Wolfson school of mechanical, Electrical and Manufacturing Engineering, Loughborough university, Loughborough, UK.

ORCID-Profile: Yan Jin

Förderung

  • Engineering and Physical Sciences Research Council

Zitieren

APA

Zhao, Z., Jin, Y., Goodall, P., West, A., & Price, M. (2026). Simultaneous dimension and tolerance design for robot manipulator considering cost and positioning accuracy reliability. The International Journal of Advanced Manufacturing Technology, 143(11-12), 6509-6522. https://doi.org/10.1007/s00170-026-17862-8

Vancouver

Zhao Z, Jin Y, Goodall P, West A, Price M. Simultaneous dimension and tolerance design for robot manipulator considering cost and positioning accuracy reliability. The International Journal of Advanced Manufacturing Technology. 2026;143(11-12):6509-6522. doi:10.1007/s00170-026-17862-8

BibTeX
@article{Zhao2026,
  author = {Zhao, Zhiwei and Jin, Yan and Goodall, Paul and West, Andrew and Price, Mark},
  title = {Simultaneous dimension and tolerance design for robot manipulator considering cost and positioning accuracy reliability},
  journal = {The International Journal of Advanced Manufacturing Technology},
  year = {2026},
  volume = {143},
  number = {11-12},
  pages = {6509--6522},
  doi = {10.1007/s00170-026-17862-8}
}
Kostenlos starten →