EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Recycling of Ti-15Mo and Ti-13Nb-13Zr alloys and their use in additive manufacturing

Eliška Galčíková, Jan Krčil, Vladimír Mára, Lucie Pilsová, Jana Sobotová, Zdeněk Míchal, Dalibor Vojtěch, Jiří Režnar

The International Journal of Advanced Manufacturing Technology · 2026-04 · 143 (9-10) · 5571-5587

DOI: 10.1007/s00170-026-17801-7 ↗

Kurz gefasst

Fachartikel in der Zeitschrift The International Journal of Advanced Manufacturing Technology, online erschienen am 14.03.2026. Verfasst von Eliška Galčíková und 7 weiteren Autor:innen. Die Arbeit nennt 57 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Czech Technical University in Prague.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Recycling of titanium alloys represents a modern and economically attractive processing route, as it enables a significant reduction in production costs associated with the high price of titanium. However, the properties of recycled β-titanium alloys have not yet been sufficiently investigated in the scientific literature, and their potential for processing by additive manufacturing technologies remains largely unexplored. This study focuses on evaluating the recycling of Ti-15Mo and Ti-13Nb-13Zr alloys using the horizontal plasma arc melting (HPAM) method and further examines subsequent processing steps, including hot working to the required shape for atomisation and subsequent powder processing via the LPBF technique. In all technological stages, the microstructure was characterised, chemical analysis was performed, and, where applicable, mechanical properties were evaluated. The results demonstrate that recycling of the investigated alloys is feasible, as is their subsequent processing up to the production of additively manufactured specimens. Nevertheless, strict control of the oxygen content is critical for both alloys, as the current levels exceed the limits specified by the relevant standards. At such elevated oxygen concentrations, the alloys are unsuitable for biomedical applications; however, their use in structural applications remains realistic, particularly considering the production cost reduction achieved through the implementation of recycling.

Förderung

  • Czech Technical University in Prague

Zitieren

APA

Galčíková, E., Krčil, J., Mára, V., Pilsová, L., Sobotová, J., Míchal, Z., Vojtěch, D., & Režnar, J. (2026). Recycling of Ti-15Mo and Ti-13Nb-13Zr alloys and their use in additive manufacturing. The International Journal of Advanced Manufacturing Technology, 143(9-10), 5571-5587. https://doi.org/10.1007/s00170-026-17801-7

Vancouver

Galčíková E, Krčil J, Mára V, Pilsová L, Sobotová J, Míchal Z, et al. Recycling of Ti-15Mo and Ti-13Nb-13Zr alloys and their use in additive manufacturing. The International Journal of Advanced Manufacturing Technology. 2026;143(9-10):5571-5587. doi:10.1007/s00170-026-17801-7

BibTeX
@article{Galkov2026,
  author = {Galčíková, Eliška and Krčil, Jan and Mára, Vladimír and Pilsová, Lucie and Sobotová, Jana and Míchal, Zdeněk and Vojtěch, Dalibor and Režnar, Jiří},
  title = {Recycling of Ti-15Mo and Ti-13Nb-13Zr alloys and their use in additive manufacturing},
  journal = {The International Journal of Advanced Manufacturing Technology},
  year = {2026},
  volume = {143},
  number = {9-10},
  pages = {5571--5587},
  doi = {10.1007/s00170-026-17801-7}
}
Kostenlos starten →