EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Analysis of the effects of FDM printing parameters on mechanical properties of parts manufactured with a new type of PLA

Gabriel Alejandro Palma de Mélo, José Maria Andrade Barbosa, Jorge Antonio Palma Carrasco, Antonio Claudio Cavalcanti Holanda, Wanderley Ferreira de Amorim, Antonio Almeida Silva, Antonio Gilson Barbosa de Lima

The International Journal of Advanced Manufacturing Technology · 2026-03 · 143 (3-4) · 2247-2267

DOI: 10.1007/s00170-026-17508-9 ↗

Kurz gefasst

Fachartikel in der Zeitschrift The International Journal of Advanced Manufacturing Technology, online erschienen am 20.02.2026. Verfasst von Gabriel Alejandro Palma de Mélo und 6 weiteren Autor:innen. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 70 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Universidade Federal De Pernambuco.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this work an experimental design was developed using DOE to determine the effects of printing parameters in FDM processes on mechanical properties of an improved PLA, the Ultrafuse ® PLA PRO1. Test specimens were manufactured on a Wietech-Durbot large semi-industrial printer considering as variables the extruder temperature, platform temperature, printing speed and infill percentage in the ranges 200–220 °C, 40–60 °C, 50 mm/s-60 mm/s and 30%-70%, respectively. Afterwards, mechanical tensile tests and fracture surface analysis were carried out. The mechanical properties obtained from samples printed with lower infill percentage was lower than mechanical properties obtained from samples with higher infill percentage, which in turn, was lower than the reference mechanical properties of Ultrafuse ® PLA PRO1. The fracture surfaces showed predominance of brittle behaviour regions on samples with 30% infill and more extensive ductile regions on samples with 70% infill. The analysis of response surfaces showed that the infill percentage has a statistically significant influence on all properties, which allowed us to establish the more appropriate printing parameters combination to maximize the mechanical response of manufactured parts. The results show that Ultrafuse ® PLA PRO1 is a material with great potential to manufacture more robust and durable parts, such as functional components, mechanisms and structural elements.

Förderung

  • Universidade Federal De Pernambuco

Zitieren

APA

Mélo, G. A. P. D., Barbosa, J. M. A., Carrasco, J. A. P., Holanda, A. C. C., Amorim, W. F. D., Silva, A. A., & Lima, A. G. B. D. (2026). Analysis of the effects of FDM printing parameters on mechanical properties of parts manufactured with a new type of PLA. The International Journal of Advanced Manufacturing Technology, 143(3-4), 2247-2267. https://doi.org/10.1007/s00170-026-17508-9

Vancouver

Mélo GAPD, Barbosa JMA, Carrasco JAP, Holanda ACC, Amorim WFD, Silva AA, et al. Analysis of the effects of FDM printing parameters on mechanical properties of parts manufactured with a new type of PLA. The International Journal of Advanced Manufacturing Technology. 2026;143(3-4):2247-2267. doi:10.1007/s00170-026-17508-9

BibTeX
@article{Mlo2026,
  author = {Mélo, Gabriel Alejandro Palma de and Barbosa, José Maria Andrade and Carrasco, Jorge Antonio Palma and Holanda, Antonio Claudio Cavalcanti and Amorim, Wanderley Ferreira de and Silva, Antonio Almeida and Lima, Antonio Gilson Barbosa de},
  title = {Analysis of the effects of FDM printing parameters on mechanical properties of parts manufactured with a new type of PLA},
  journal = {The International Journal of Advanced Manufacturing Technology},
  year = {2026},
  volume = {143},
  number = {3-4},
  pages = {2247--2267},
  doi = {10.1007/s00170-026-17508-9}
}
Kostenlos starten →