Structured Light 3D Scanning Method For Shape And Thickness Measurement Of Thin Metal Sheets With Application To Single Point Incremental Forming
The International Journal of Advanced Manufacturing Technology · 2025-11 · 141 (3-4) · 2143-2160
DOI: 10.1007/s00170-025-16823-x ↗Kurz gefasst
Fachartikel in der Zeitschrift The International Journal of Advanced Manufacturing Technology, online erschienen am 23.10.2025. Verfasst von Emanuel Badulescu und 4 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 19 Literaturangaben.
Abstract (Originalsprache)
This paper presents a robust and efficient optical method for measuring thin-sheet metal parts using a structured-light 3D scanner. First, it describes the characteristics of the optical device used, including the underlying physical principles, limitations, and procedure for assessing the system's accuracy. Next, a method for calculating the thickness of the parts is proposed and evaluated using geometries derived from CAD models, as well as destructive measurements performed on a real part. Subsequently, an acquisition strategy that accounts for the scanner's limitations is introduced and experimentally validated. Lastly, the proposed methodology is applied to thin-sheet components produced by incremental forming as illustrative examples. This final section highlights the influence of tool geometry and lubrication conditions on resulting part geometries. Therefore, the proposed inspection strategy opens up promising perspectives, particularly for optimizing forming parameters in the SPIF process.
Zitieren
APA
Badulescu, E., Argouarc’h, Y., Nitu, E., Iordache, M. D., & Badulescu, C. (2025). Structured Light 3D Scanning Method For Shape And Thickness Measurement Of Thin Metal Sheets With Application To Single Point Incremental Forming. The International Journal of Advanced Manufacturing Technology, 141(3-4), 2143-2160. https://doi.org/10.1007/s00170-025-16823-x
Vancouver
Badulescu E, Argouarc’h Y, Nitu E, Iordache MD, Badulescu C. Structured Light 3D Scanning Method For Shape And Thickness Measurement Of Thin Metal Sheets With Application To Single Point Incremental Forming. The International Journal of Advanced Manufacturing Technology. 2025;141(3-4):2143-2160. doi:10.1007/s00170-025-16823-x
BibTeX
@article{Badulescu2025,
author = {Badulescu, Emanuel and Argouarc’h, Yannick and Nitu, Eduard and Iordache, Monica Daniela and Badulescu, Claudiu},
title = {Structured Light 3D Scanning Method For Shape And Thickness Measurement Of Thin Metal Sheets With Application To Single Point Incremental Forming},
journal = {The International Journal of Advanced Manufacturing Technology},
year = {2025},
volume = {141},
number = {3-4},
pages = {2143--2160},
doi = {10.1007/s00170-025-16823-x}
}
EUVIMED