Prediction and suppression of exit burr height in ultrasonic vibration-assisted micro-drilling of GH4169 superalloy
The International Journal of Advanced Manufacturing Technology · 2025-09 · 140 (1-2) · 891-908
DOI: 10.1007/s00170-025-16335-8 ↗Kurz gefasst
Fachartikel in der Zeitschrift The International Journal of Advanced Manufacturing Technology, online erschienen am 19.08.2025. Verfasst von Dingyi Tao und 8 weiteren Autor:innen. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 41 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Natural Science Foundation of Jiangsu Province, Natural Science Research of Jiangsu Higher Education Institutions of China.
Abstract (Originalsprache)
GH4169 is a nickel-based superalloy renowned for its excellent resistance to high temperatures, corrosion, and fatigue. Due to these properties, it is widely used in the aerospace industry for manufacturing hot-section components, particularly turbine blades in aero-engines. Air film holes are critical structural features in turbine blades, but burr formation commonly occurs during the drilling process. This study investigates the mechanism of burr formation in conventional drilling (CD) and ultrasonic vibration-assisted drilling (UAD). An analytical model is developed to predict the evolution of burr height in UAD based on the principle of energy conservation. The proposed framework combines dynamic cutting mechanics with plastic deformation energy dissipation, establishing quantitative correlations between machining parameters and burr height. Experimental results show that, at a spindle speed of 9000 rpm and a feed rate of 5 mm/min, UAD with a vibration amplitude of 6 μm reduces the axial force from 13.29 N (in CD) to 7.34 N, corresponding to a 44.75% decrease. Moreover, the burr height decreases from 36.13 to 28 μm, representing a 22.5% reduction. The burr morphology also changes, forming a ring of thin, curved burrs at the hole exit. To quantify the influence of machining parameters on burr dimensions, multivariate regression analysis (MRA) was employed, and the material removal rate (MRR) was also calculated. Through parameter optimization, an optimal set of ultrasonic micro-drilling conditions was determined: ultrasonic amplitude of 6 μm, feed rate of 6.3 mm/min, and spindle speed of 9000 rpm. This configuration effectively suppresses burr formation while maintaining a high material removal rate.
Förderung
- National Natural Science Foundation of China
- Natural Science Foundation of Jiangsu Province
- Natural Science Research of Jiangsu Higher Education Institutions of China
- Postdoctoral Research Foundation of China
- National Key Labortory of Particle Transport and Separation Technology
- Postgraduate Research and Practice Innovation Programme of Jiangsu Province
Zitieren
APA
Tao, D., Yin, Z., An, Q., Yu, M., Yu, Z., Miao, Q., Dai, C., Zhang, M., & Li, H. (2025). Prediction and suppression of exit burr height in ultrasonic vibration-assisted micro-drilling of GH4169 superalloy. The International Journal of Advanced Manufacturing Technology, 140(1-2), 891-908. https://doi.org/10.1007/s00170-025-16335-8
Vancouver
Tao D, Yin Z, An Q, Yu M, Yu Z, Miao Q, et al. Prediction and suppression of exit burr height in ultrasonic vibration-assisted micro-drilling of GH4169 superalloy. The International Journal of Advanced Manufacturing Technology. 2025;140(1-2):891-908. doi:10.1007/s00170-025-16335-8
BibTeX
@article{Tao2025,
author = {Tao, Dingyi and Yin, Zhen and An, Qinglong and Yu, Mengqiu and Yu, Zixin and Miao, Qing and Dai, Chenwei and Zhang, Ming and Li, Hua},
title = {Prediction and suppression of exit burr height in ultrasonic vibration-assisted micro-drilling of GH4169 superalloy},
journal = {The International Journal of Advanced Manufacturing Technology},
year = {2025},
volume = {140},
number = {1-2},
pages = {891--908},
doi = {10.1007/s00170-025-16335-8}
}
EUVIMED