EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Monitoring system and anomaly detection in dissimilar friction stir lap welding based on MEMS sensor, power consumption, and temperature

Alessia Teresa Silvestri, Giorgio de Alteriis, Ersilia Cozzolino, Rosario Schiano Lo Moriello, Antonino Squillace, Antonello Astarita

The International Journal of Advanced Manufacturing Technology · 2025-08 · 139 (9-10) · 4759-4777

DOI: 10.1007/s00170-025-16163-w ↗

Kurz gefasst

Fachartikel in der Zeitschrift The International Journal of Advanced Manufacturing Technology, online erschienen am 30.07.2025. Verfasst von Alessia Teresa Silvestri und 5 weiteren Autor:innen. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 78 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Università degli Studi di Napoli Federico II.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study presents a multi-sensor monitoring strategy for dissimilar friction stir lap welding (FSW), combining tri-axial MEMS-based acceleration measurements with motor power consumption and thermocouple data. The approach aims to detect and characterize process instabilities and defect formation, including porosity, tunnel voids, and excessive flash, without requiring destructive testing. Experimental campaigns were conducted on AA 2024-T3 and AA 7075-T6 aluminum alloys using six welding conditions, intentionally generating both sound and defective joints. The results reveal distinct power and acceleration trends across the plunging, dwell, and welding phases, which are directly linked to the nature of the defects. The analysis revealed that stable welds were associated with motor power near 1200 ± 8 W, RMS acceleration below 0.10 m/s 2 , and vibration frequencies around 150–220 Hz. In contrast, defective joints exhibited power deviations up to ± 250 W, RMS acceleration as high as 0.24 m/s 2 , and dominant frequencies shifting toward 300–400 Hz, often correlating with tool wear and porosity formation. These results demonstrate the effectiveness of the proposed method in enabling early detection of welding anomalies through sensor-based signal analysis, contributing to process optimization and enhanced weld quality. This approach has significant implications for industrial applications, offering a scalable and reliable framework for sustainable manufacturing.

Förderung

  • Università degli Studi di Napoli Federico II

Zitieren

APA

Silvestri, A. T., Alteriis, G. D., Cozzolino, E., Moriello, R. S. L., Squillace, A., & Astarita, A. (2025). Monitoring system and anomaly detection in dissimilar friction stir lap welding based on MEMS sensor, power consumption, and temperature. The International Journal of Advanced Manufacturing Technology, 139(9-10), 4759-4777. https://doi.org/10.1007/s00170-025-16163-w

Vancouver

Silvestri AT, Alteriis GD, Cozzolino E, Moriello RSL, Squillace A, Astarita A. Monitoring system and anomaly detection in dissimilar friction stir lap welding based on MEMS sensor, power consumption, and temperature. The International Journal of Advanced Manufacturing Technology. 2025;139(9-10):4759-4777. doi:10.1007/s00170-025-16163-w

BibTeX
@article{Silvestri2025,
  author = {Silvestri, Alessia Teresa and Alteriis, Giorgio de and Cozzolino, Ersilia and Moriello, Rosario Schiano Lo and Squillace, Antonino and Astarita, Antonello},
  title = {Monitoring system and anomaly detection in dissimilar friction stir lap welding based on MEMS sensor, power consumption, and temperature},
  journal = {The International Journal of Advanced Manufacturing Technology},
  year = {2025},
  volume = {139},
  number = {9-10},
  pages = {4759--4777},
  doi = {10.1007/s00170-025-16163-w}
}
Kostenlos starten →