Hybrid GRA-TOPSIS optimization of friction stir welding for SiCp-reinforced AZ31C magnesium alloy
The International Journal of Advanced Manufacturing Technology · 2025-08 · 139 (9-10) · 4457-4478
DOI: 10.1007/s00170-025-16124-3 ↗Kurz gefasst
Fachartikel in der Zeitschrift The International Journal of Advanced Manufacturing Technology, online erschienen am 28.07.2025. Verfasst von Ibrahim Sabry. Die Arbeit wurde bisher 26-mal zitiert (Crossref) und nennt 55 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Benha University.
Abstract (Originalsprache)
Friction stir welding (FSW), a solid-state joining process, has gained significant attention for its ability to enhance weld quality and mechanical properties. This study optimizes the FSW parameters for AZ31C magnesium alloy reinforced with silicon carbide (SiCp) nanoparticles using a hybrid grey relational analysis—technique for order preference by similarity to ideal solution (GRA-TOPSIS) approach. The effects of SiCp content (5 wt%), tool tilt angle (1°, 1.5°, and 2°), rotational speed (1000, 1500, and 2000 rpm), tool profile (threaded, cylindrical, and conical), and traverse speed (5, 10, and 16 mm/min) were analyzed. The results indicate that the optimal welding parameters—rotational speed of 2000 rpm, traverse speed of 10 mm/min, tilt angle of 1.5°, and a conical tool profile—significantly enhanced mechanical performance. The highest tensile strength (274 MPa), microhardness (102 HV), and impact strength (109 MPa) were achieved under these conditions, demonstrating the effectiveness of SiCp reinforcement and process optimization.
Förderung
- Benha University
Zitieren
APA
Sabry, I. (2025). Hybrid GRA-TOPSIS optimization of friction stir welding for SiCp-reinforced AZ31C magnesium alloy. The International Journal of Advanced Manufacturing Technology, 139(9-10), 4457-4478. https://doi.org/10.1007/s00170-025-16124-3
Vancouver
Sabry I. Hybrid GRA-TOPSIS optimization of friction stir welding for SiCp-reinforced AZ31C magnesium alloy. The International Journal of Advanced Manufacturing Technology. 2025;139(9-10):4457-4478. doi:10.1007/s00170-025-16124-3
BibTeX
@article{Sabry2025,
author = {Sabry, Ibrahim},
title = {Hybrid GRA-TOPSIS optimization of friction stir welding for SiCp-reinforced AZ31C magnesium alloy},
journal = {The International Journal of Advanced Manufacturing Technology},
year = {2025},
volume = {139},
number = {9-10},
pages = {4457--4478},
doi = {10.1007/s00170-025-16124-3}
}
EUVIMED