EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Laser surface treatment of Ti6Al4V alloy: finite element analysis for predicting molten pool geometry and microstructure modifications

Serafino Caruso, Maria Rosaria Saffioti, Antonio Del Prete, Giovanna Rotella

The International Journal of Advanced Manufacturing Technology · 2025-04 · 137 (7-8) · 3967-3976

DOI: 10.1007/s00170-025-15403-3 ↗

Kurz gefasst

Fachartikel in der Zeitschrift The International Journal of Advanced Manufacturing Technology, online erschienen am 20.03.2025. Verfasst von Serafino Caruso und 3 weiteren Autor:innen. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 22 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Università della Calabria.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study investigates the effects of laser surface treatment on Ti6Al4V titanium alloy using both experimental and finite element analysis. Experimental parameters included varying laser scanning speeds (30, 45, and 60 mm/s) while maintaining a fixed pulse frequency and average power. The temperature profiles during the treatment were monitored and used to calibrate the heat exchange coefficients in the numerical model. Metallographic analysis of the treated surfaces revealed increased hardness in the remelting zone while X-ray diffraction analysis confirmed the formation of the α’-phase martensite, particularly at lower scanning speeds. The 3D finite element model was calibrated against experimental data and effectively used to predict the molten pool geometry, including molten pool width and penetration depth. The numerical model accurately predicted the effects of laser treatment on microstructure and mechanical properties, offering a tool for optimizing laser surface treatment parameters for enhanced surface performance. The study demonstrates that laser scanning speed plays a critical role in controlling the molten pool dimensions and the resulting phase transformations, which can improve the alloy’s mechanical properties, including hardness and wear resistance.

Förderung

  • Università della Calabria

Zitieren

APA

Caruso, S., Saffioti, M. R., Prete, A. D., & Rotella, G. (2025). Laser surface treatment of Ti6Al4V alloy: finite element analysis for predicting molten pool geometry and microstructure modifications. The International Journal of Advanced Manufacturing Technology, 137(7-8), 3967-3976. https://doi.org/10.1007/s00170-025-15403-3

Vancouver

Caruso S, Saffioti MR, Prete AD, Rotella G. Laser surface treatment of Ti6Al4V alloy: finite element analysis for predicting molten pool geometry and microstructure modifications. The International Journal of Advanced Manufacturing Technology. 2025;137(7-8):3967-3976. doi:10.1007/s00170-025-15403-3

BibTeX
@article{Caruso2025,
  author = {Caruso, Serafino and Saffioti, Maria Rosaria and Prete, Antonio Del and Rotella, Giovanna},
  title = {Laser surface treatment of Ti6Al4V alloy: finite element analysis for predicting molten pool geometry and microstructure modifications},
  journal = {The International Journal of Advanced Manufacturing Technology},
  year = {2025},
  volume = {137},
  number = {7-8},
  pages = {3967--3976},
  doi = {10.1007/s00170-025-15403-3}
}
Kostenlos starten →