EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Laser-based directed energy deposition and characterisation of cBN-reinforced NiAl-based coatings

Michael Müller, Leonid Gerdt, Susanne Schrüfer, Mirko Riede, Elena López, Frank Brueckner, Christoph Leyens

The International Journal of Advanced Manufacturing Technology · 2024-09 · 134 (1-2) · 657-675

DOI: 10.1007/s00170-024-14032-6 ↗

Kurz gefasst

Fachartikel in der Zeitschrift The International Journal of Advanced Manufacturing Technology, online erschienen am 25.07.2024. Verfasst von Michael Müller und 6 weiteren Autor:innen. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 48 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Bundesministerium für Wirtschaft und Klimaschutz, Technische Universität Dresden.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Within this study, the alloy NiAl–2.5Ta–7.5Cr is investigated as a new matrix material for cBN-reinforced abrasive turbine blade tip coatings as currently used NiCoCrAlY matrix alloys suffer from insufficient strength at the high operating temperatures. Laser-based directed energy deposition with blown powder was applied to produce cBN reinforced NiAl-based coatings on monocrystalline CMSX-4 substrates. For this, powdery titanium-coated cBN and NiAl–2.5Ta–7.5Cr material were co-injected into the process zone to achieve an in situ formation of a NiAl–2.5Ta–7.5Cr/cBN composite. In order to overcome challenges such as cracking susceptibility, inductive preheating of the substrate up to 800 °C was used. Optical and scanning electron microscopy, energy dispersive X-ray spectroscopy, as well as electron backscatter diffraction were applied to analyse the fabricated samples’ microstructure. Additionally, the mechanical properties were evaluated by means of microhardness mappings. This work demonstrates the feasibility of in situ forming a metal matrix composite with a homogeneous distribution of cBN particles. The results show the beneficial effect of high-temperature preheating on the crack formation. However, the study also reveals challenges such as cracking induced by the injected cBN particles as well as severe intermixing of substrate and coating, which yields spatially resolved deviations in the chemical composition and resulting variations in microstructure and hardness. Graphical abstract

Förderung

  • Bundesministerium für Wirtschaft und Klimaschutz
  • Technische Universität Dresden

Zitieren

APA

Müller, M., Gerdt, L., Schrüfer, S., Riede, M., López, E., Brueckner, F., & Leyens, C. (2024). Laser-based directed energy deposition and characterisation of cBN-reinforced NiAl-based coatings. The International Journal of Advanced Manufacturing Technology, 134(1-2), 657-675. https://doi.org/10.1007/s00170-024-14032-6

Vancouver

Müller M, Gerdt L, Schrüfer S, Riede M, López E, Brueckner F, et al. Laser-based directed energy deposition and characterisation of cBN-reinforced NiAl-based coatings. The International Journal of Advanced Manufacturing Technology. 2024;134(1-2):657-675. doi:10.1007/s00170-024-14032-6

BibTeX
@article{Mller2024,
  author = {Müller, Michael and Gerdt, Leonid and Schrüfer, Susanne and Riede, Mirko and López, Elena and Brueckner, Frank and Leyens, Christoph},
  title = {Laser-based directed energy deposition and characterisation of cBN-reinforced NiAl-based coatings},
  journal = {The International Journal of Advanced Manufacturing Technology},
  year = {2024},
  volume = {134},
  number = {1-2},
  pages = {657--675},
  doi = {10.1007/s00170-024-14032-6}
}
Kostenlos starten →