EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Springback prediction using point series and deep learning

Yang Bingqian, Yuanyi Zeng, Hai Yang, Mariluz Penalva Oscoz, Mikel Ortiz, Frans Coenen, Anh Nguyen

The International Journal of Advanced Manufacturing Technology · 2024-06 · 132 (9-10) · 4723-4735

DOI: 10.1007/s00170-024-13632-6 ↗

Kurz gefasst

Fachartikel in der Zeitschrift The International Journal of Advanced Manufacturing Technology, online erschienen am 25.04.2024. Verfasst von Yang Bingqian und 6 weiteren Autor:innen. Die Arbeit wurde bisher 23-mal zitiert (Crossref) und nennt 22 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

One of the main challenges that prevent wide adoption of Single Point Incremental Forming (SPIF) is the geometric accuracy of the process resulting primarily from the effect of springback. There are various expedients that can be adopted to address this, but one of the most common is tool path correction. The challenge is then how best to predict springback so as to implement tool path correction. It is established that springback, to a large extent, is related to the geometry of the part to be manufactured. The proposed mechanism uses a novel point series representation to capture local geometries that then form a global bank of geometries for general use. Each point series can then be associated with a predicted springback value generated using deep or machine learning. Experiments are reported using a Long Short Term Memory (LSTM) model coupled with a Multilayer Perception Network (MLP), and a Support Vector Machine (SVM) regression model. A best R2, “Coefficient of Determination”, of 0.9181 was obtained indicating that the proposed approach provided a realistic solution to the current limitations of SPIF.

Zitieren

APA

Bingqian, Y., Zeng, Y., Yang, H., Oscoz, M. P., Ortiz, M., Coenen, F., & Nguyen, A. (2024). Springback prediction using point series and deep learning. The International Journal of Advanced Manufacturing Technology, 132(9-10), 4723-4735. https://doi.org/10.1007/s00170-024-13632-6

Vancouver

Bingqian Y, Zeng Y, Yang H, Oscoz MP, Ortiz M, Coenen F, et al. Springback prediction using point series and deep learning. The International Journal of Advanced Manufacturing Technology. 2024;132(9-10):4723-4735. doi:10.1007/s00170-024-13632-6

BibTeX
@article{Bingqian2024,
  author = {Bingqian, Yang and Zeng, Yuanyi and Yang, Hai and Oscoz, Mariluz Penalva and Ortiz, Mikel and Coenen, Frans and Nguyen, Anh},
  title = {Springback prediction using point series and deep learning},
  journal = {The International Journal of Advanced Manufacturing Technology},
  year = {2024},
  volume = {132},
  number = {9-10},
  pages = {4723--4735},
  doi = {10.1007/s00170-024-13632-6}
}
Kostenlos starten →