EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Investigation of tool wear and energy consumption in machining Ti6Al4V alloy with uncoated tools

Muhammad Younas, Mushtaq Khan, Syed Husain Imran Jaffery, Zarak Khan, Nawar Khan

The International Journal of Advanced Manufacturing Technology · 2024-06 · 132 (7-8) · 3785-3799

DOI: 10.1007/s00170-024-13548-1 ↗

Kurz gefasst

Fachartikel in der Zeitschrift The International Journal of Advanced Manufacturing Technology, online erschienen am 16.04.2024. Verfasst von Muhammad Younas und 4 weiteren Autor:innen. Die Arbeit wurde bisher 20-mal zitiert (Crossref) und nennt 42 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This research studies the energy consumption and wear mechanism of carbide cutting tools in dry machining of Ti6Al4V alloy. In the first phase of experiments, full factorial design experiments were employed to study the tool wear rate ( R ) and specific cutting energy (SCE) with respect to the machining conditions (cutting speed and feed rate). Results showed that machining responses such as tool wear and energy consumption are affected by cutting conditions, thus requiring investigation to understand the wear mechanisms. Therefore, in the second phase, additional experiments were performed to investigate the tool-workpiece interactions at the cutting conditions reported to have low, moderate, and high tool wear. It was revealed that strong adhesion and material transfer between the tool and workpiece caused high wear. Electron dispersive X-ray spectroscopy (EDX) analysis of worn tools showed that the transfer of tungsten (W) and cobalt (Co) to the workpiece and titanium to the tool surface is the primary cause of tool deterioration. As a result, diffusion and dissolution have degraded cutting performance and weakened the tool edge, leading to rapid wear. Furthermore, worn tools resulted in relatively higher energy consumption per unit volume of material removed at the tooltip. The degradation of cutting performance and weakening of the tool edge results in rapid wear and higher energy consumption. The study suggests that minimizing tool wear is crucial for energy reduction, improved sustainability, and cleaner production goals in dry machining of titanium-based alloys.

Zitieren

APA

Younas, M., Khan, M., Jaffery, S. H. I., Khan, Z., & Khan, N. (2024). Investigation of tool wear and energy consumption in machining Ti6Al4V alloy with uncoated tools. The International Journal of Advanced Manufacturing Technology, 132(7-8), 3785-3799. https://doi.org/10.1007/s00170-024-13548-1

Vancouver

Younas M, Khan M, Jaffery SHI, Khan Z, Khan N. Investigation of tool wear and energy consumption in machining Ti6Al4V alloy with uncoated tools. The International Journal of Advanced Manufacturing Technology. 2024;132(7-8):3785-3799. doi:10.1007/s00170-024-13548-1

BibTeX
@article{Younas2024,
  author = {Younas, Muhammad and Khan, Mushtaq and Jaffery, Syed Husain Imran and Khan, Zarak and Khan, Nawar},
  title = {Investigation of tool wear and energy consumption in machining Ti6Al4V alloy with uncoated tools},
  journal = {The International Journal of Advanced Manufacturing Technology},
  year = {2024},
  volume = {132},
  number = {7-8},
  pages = {3785--3799},
  doi = {10.1007/s00170-024-13548-1}
}
Kostenlos starten →