EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Fabrication and characterization of aluminum foam reinforced with nanostructured γ-Al2O3 via friction stir process for enhanced mechanical performance

Ioannis G. Papantoniou, Dimitrios E. Manolakos

The International Journal of Advanced Manufacturing Technology · 2024-02 · 130 (11-12) · 5359-5368

DOI: 10.1007/s00170-024-13044-6 ↗

Kurz gefasst

Fachartikel in der Zeitschrift The International Journal of Advanced Manufacturing Technology, online erschienen am 23.01.2024. Verfasst von Ioannis G. Papantoniou und 1 weiteren Autor:innen. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 30 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Technical University of Athens.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study focuses on the fabrication and characterization of aluminum foam reinforced with nanostructured γ-Al 2 O 3 , utilizing AA5083 plates. The fabrication process involved the integration of TiH 2 foaming agent particles and reinforcing nanoparticles via the friction stir process (FSP), resulting in the creation of precursor specimens. Subsequently, a separate foaming stage was conducted within a laboratory furnace. The integration of these particles was achieved through the machining of parallel grooves in a single aluminum plate. The initial phase of the experimental study focused on investigating the effect of varying amounts of the foaming agent. Large-scale foams were then produced, achieving a medium porosity of 70%. Electro-discharge machining was employed to prepare specimens for compression testing to analyze their stress–strain response. The results revealed a plateau stress of 27 MPa, a relative Young’s modulus of 4.44 × 10 −3 , and an energy absorption close to 17 MJ/m 3 at 50% strain. Significantly enhanced plateau stress was observed in the manufactured reinforced aluminum foam compared to similar foams produced through conventional methods.

Förderung

  • National Technical University of Athens

Zitieren

APA

Papantoniou, I. G., & Manolakos, D. E. (2024). Fabrication and characterization of aluminum foam reinforced with nanostructured γ-Al2O3 via friction stir process for enhanced mechanical performance. The International Journal of Advanced Manufacturing Technology, 130(11-12), 5359-5368. https://doi.org/10.1007/s00170-024-13044-6

Vancouver

Papantoniou IG, Manolakos DE. Fabrication and characterization of aluminum foam reinforced with nanostructured γ-Al2O3 via friction stir process for enhanced mechanical performance. The International Journal of Advanced Manufacturing Technology. 2024;130(11-12):5359-5368. doi:10.1007/s00170-024-13044-6

BibTeX
@article{Papantoniou2024,
  author = {Papantoniou, Ioannis G. and Manolakos, Dimitrios E.},
  title = {Fabrication and characterization of aluminum foam reinforced with nanostructured γ-Al2O3 via friction stir process for enhanced mechanical performance},
  journal = {The International Journal of Advanced Manufacturing Technology},
  year = {2024},
  volume = {130},
  number = {11-12},
  pages = {5359--5368},
  doi = {10.1007/s00170-024-13044-6}
}
Kostenlos starten →