EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Parametric investigation of ultrashort pulsed laser surface texturing on aluminium alloy 7075 for hydrophobicity enhancement

Abhijit Cholkar iD, Suman Chatterjee, Feljin Jose, Robert O'Connor, Éanna McCarthy, Nick Weston, David Kinahan, Dermot Brabazon

The International Journal of Advanced Manufacturing Technology · 2024-02 · 130 (9-10) · 4169-4186

DOI: 10.1007/s00170-024-12971-8 ↗

Kurz gefasst

Fachartikel in der Zeitschrift The International Journal of Advanced Manufacturing Technology, online erschienen am 13.01.2024. Verfasst von Abhijit Cholkar und 7 weiteren Autor:innen. Beteiligte Einrichtung: I-Form, Advanced Manufacturing Research Centre, Dublin City University, Glasnevin, Dublin, Ireland. Die Arbeit wurde bisher 16-mal zitiert (Crossref) und nennt 53 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Horizon 2020, Science Foundation Ireland, Dublin City University.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Hydrophobicity plays a pivotal role in mitigating surface fouling, corrosion, and icing in critical marine and aerospace environments. By employing ultrafast laser texturing, the characteristic properties of a material’s surface can be modified. This work investigates the potential of an advanced ultrafast laser texturing manufacturing process to enhance the hydrophobicity of aluminium alloy 7075. The surface properties were characterized using goniometry, 3D profilometry, SEM, and XPS analysis. The findings from this study show that the laser process parameters play a crucial role in the manufacturing of the required surface structures. Numerical optimization with response surface optimization was conducted to maximize the contact angle on these surfaces. The maximum water contact angle achieved was 142º, with an average height roughness (Sa) of 0.87 ± 0.075 µm, maximum height roughness (Sz) of 19.4 ± 2.12 µm, and texture aspect ratio of 0.042. This sample was manufactured with the process parameters of 3W laser power, 0.08 mm hatch distance, and a 3 mm/s scan speed. This study highlights the importance of laser process parameters in the manufacturing of the required surface structures and presents a parametric modeling approach that can be used to optimize the laser process parameters to obtain a specific surface morphology and hydrophobicity.

Schlagwörter

Stichwörter der Autor:innen

Hydrophobic surfacesLaser process parameter optimizationParametric modelingSurface chemistrySurface morphologyUltrafast laser surface texturing

Autor:innen und Institutionen

  • I-Form, Advanced Manufacturing Research Centre, Dublin City University, Glasnevin, Dublin, Ireland.
  • Advanced Processing Technology Research Centre, School of Mechanical and Manufacturing Engineering, Dublin City University, Glasnevin, Dublin, Ireland.
  • DCU Water Institute, Dublin City University, Glasnevin, Dublin, Ireland.
  • School of Physical Sciences, Dublin City University, Glasnevin, Dublin, Ireland.
  • Renishaw Edinburgh, Riccarton, Edinburgh, EH14 4AP UK.

ORCID-Profile: Abhijit Cholkar

Förderung

  • Horizon 2020
  • Science Foundation Ireland
  • Dublin City University

Zitieren

APA

Cholkar, A., Chatterjee, S., Jose, F., O'Connor, R., McCarthy, É., Weston, N., Kinahan, D., & Brabazon, D. (2024). Parametric investigation of ultrashort pulsed laser surface texturing on aluminium alloy 7075 for hydrophobicity enhancement. The International Journal of Advanced Manufacturing Technology, 130(9-10), 4169-4186. https://doi.org/10.1007/s00170-024-12971-8

Vancouver

Cholkar A, Chatterjee S, Jose F, O'Connor R, McCarthy É, Weston N, et al. Parametric investigation of ultrashort pulsed laser surface texturing on aluminium alloy 7075 for hydrophobicity enhancement. The International Journal of Advanced Manufacturing Technology. 2024;130(9-10):4169-4186. doi:10.1007/s00170-024-12971-8

BibTeX
@article{Cholkar2024,
  author = {Cholkar, Abhijit and Chatterjee, Suman and Jose, Feljin and O'Connor, Robert and McCarthy, Éanna and Weston, Nick and Kinahan, David and Brabazon, Dermot},
  title = {Parametric investigation of ultrashort pulsed laser surface texturing on aluminium alloy 7075 for hydrophobicity enhancement},
  journal = {The International Journal of Advanced Manufacturing Technology},
  year = {2024},
  volume = {130},
  number = {9-10},
  pages = {4169--4186},
  doi = {10.1007/s00170-024-12971-8}
}
Kostenlos starten →