EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Infrared in-line monitoring of flaws in steel welded joints: a preliminary approach with SMAW and GMAW processes

Luca Santoro, Raffaella Sesana, Rosario Molica Nardo, Francesca Curá

The International Journal of Advanced Manufacturing Technology · 2023-09 · 128 (5-6) · 2655-2670

DOI: 10.1007/s00170-023-12044-2 ↗

Kurz gefasst

Fachartikel in der Zeitschrift The International Journal of Advanced Manufacturing Technology, online erschienen am 09.08.2023. Verfasst von Luca Santoro und 3 weiteren Autor:innen. Die Arbeit wurde bisher 38-mal zitiert (Crossref) und nennt 54 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Politecnico di Torino.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The non-destructive full-field non-contact thermographic technique is applied for non-destructive flaw detection of the welded joints, in real-time and offline configuration. In this paper, a thermographic procedure for real-time flaw detection in manual arc welding process is presented. Surface temperature acquisitions by means of an IR camera were performed during arc welding process of 8 specimen both for calibration and validation of the numerical model. The investigated variables are the technique (manual stick arc (SMAW) and gas arc (GMAW) welding) and the joint shape (butt and T joint) for steel joints, in sound conditions and with artificial flaws. Numerical simulation of welding thermal transients was run to obtain the expected surface temperature fields and thermal behavior for different welding parameter configurations. Hardness measurement and micro-graphic analysis were performed to validate numerical simulation results. The real-time thermographic study of the weld pool gives direct indications of anomalies; local studies of the thermal transient and thermal profiles can detect some kind of flaws; microstructural analysis of Heat-Affected Zone (HAZ) and surrounding areas higlights the presence of austenite and martensite distribution which justifies the thermal transients and thermal profiles for different welding configurations. Comparing real-time IR acquisition of the welding process with simulated thermal contours of sound processes provides information of presence of some kind of flaws. Since most of the flaws are generated in the weld pool, it is possible to recognize anomalies directly from the thermal acquisitions or with post-processing the acquired data.

Förderung

  • Politecnico di Torino

Zitieren

APA

Santoro, L., Sesana, R., Nardo, R. M., & Curá, F. (2023). Infrared in-line monitoring of flaws in steel welded joints: a preliminary approach with SMAW and GMAW processes. The International Journal of Advanced Manufacturing Technology, 128(5-6), 2655-2670. https://doi.org/10.1007/s00170-023-12044-2

Vancouver

Santoro L, Sesana R, Nardo RM, Curá F. Infrared in-line monitoring of flaws in steel welded joints: a preliminary approach with SMAW and GMAW processes. The International Journal of Advanced Manufacturing Technology. 2023;128(5-6):2655-2670. doi:10.1007/s00170-023-12044-2

BibTeX
@article{Santoro2023,
  author = {Santoro, Luca and Sesana, Raffaella and Nardo, Rosario Molica and Curá, Francesca},
  title = {Infrared in-line monitoring of flaws in steel welded joints: a preliminary approach with SMAW and GMAW processes},
  journal = {The International Journal of Advanced Manufacturing Technology},
  year = {2023},
  volume = {128},
  number = {5-6},
  pages = {2655--2670},
  doi = {10.1007/s00170-023-12044-2}
}
Kostenlos starten →