Experimental study of micromilling process and deburring electropolishing process on FeCo-based soft magnetic alloys
The International Journal of Advanced Manufacturing Technology · 2023-06 · 126 (7-8) · 3235-3248
DOI: 10.1007/s00170-023-11293-5 ↗Kurz gefasst
Fachartikel in der Zeitschrift The International Journal of Advanced Manufacturing Technology, online erschienen am 30.03.2023. Verfasst von Gabriel Villalba-Alumbreros und 5 weiteren Autor:innen. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 56 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: H2020 Excellent Science, Ministerio de Ciencia e Innovación, Universidad de Alcalá.
Abstract (Originalsprache)
FeCo-based soft magnetic alloys are commonly used in macroscale devices to improve its electromagnetic performance, whereas they have been barely used in the microscale. Current FeCo alloy micromanufacturing processes present some difficulties like low structural strength, oxidation at high temperature processes, stoichiometry mismatches in deposition processes and tough workability. In this work, a microcutting of FeCo-2 V-based soft magnetic alloys process is presented and described as an alternative method to obtain microparts with high magnetic properties and good geometrical finish. The results of the machining process are analysed by varying the machining parameters such as depth of cut, tool diameter, rotation speed and feed speed on simple machining operations. The study has been done for 50-μm-diameter endmill and 250-μm-diameter endmill tools. It concludes that the roughness is minimized when machining parameter combination is 0.24 mm/min of feed rate and 8 μm of depth of cut size for a 250-μm-diameter tool, while for a 50-μm-diameter tool, the selected feed rate is 0.24 mm/min, for a depth of cut between 2 and 4 μm. An automated precision 3-axis CNC station is used. Shapes needed for actuators such as angular slots, disks, or slender square geometries are shown in this work with excellent magnetic and mechanical properties. Additionally, a complementary electropolishing process is described. This process helps to eliminate burr in edges and residuals of the milling operation. This study demonstrates that micromilling can be a good alternative for microfabrication of FeCo-2 V components, suitable for precision microassemblies on MEMS.
Förderung
- H2020 Excellent Science
- Ministerio de Ciencia e Innovación
- Universidad de Alcalá
Zitieren
APA
Villalba-Alumbreros, G., Lopez-Camara, E., Martínez-Gómez, J., Cobreces, S., Valiente-Blanco, I., & Diez-Jimenez, E. (2023). Experimental study of micromilling process and deburring electropolishing process on FeCo-based soft magnetic alloys. The International Journal of Advanced Manufacturing Technology, 126(7-8), 3235-3248. https://doi.org/10.1007/s00170-023-11293-5
Vancouver
Villalba-Alumbreros G, Lopez-Camara E, Martínez-Gómez J, Cobreces S, Valiente-Blanco I, Diez-Jimenez E. Experimental study of micromilling process and deburring electropolishing process on FeCo-based soft magnetic alloys. The International Journal of Advanced Manufacturing Technology. 2023;126(7-8):3235-3248. doi:10.1007/s00170-023-11293-5
BibTeX
@article{VillalbaAlumbreros2023,
author = {Villalba-Alumbreros, Gabriel and Lopez-Camara, Enrique and Martínez-Gómez, Javier and Cobreces, Santiago and Valiente-Blanco, Ignacio and Diez-Jimenez, Efren},
title = {Experimental study of micromilling process and deburring electropolishing process on FeCo-based soft magnetic alloys},
journal = {The International Journal of Advanced Manufacturing Technology},
year = {2023},
volume = {126},
number = {7-8},
pages = {3235--3248},
doi = {10.1007/s00170-023-11293-5}
}
EUVIMED