EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A virtual stylus method for non-destructive roughness profile measurement of additive manufactured lattice structures

David Downing, Jason Rogers, Rance Tino, Joe Elambasseril, Chris Wallbrink, Ma Qian, Milan Brandt, Martin Leary

The International Journal of Advanced Manufacturing Technology · 2023-04 · 125 (7-8) · 3723-3742

DOI: 10.1007/s00170-023-10865-9 ↗

Kurz gefasst

Fachartikel in der Zeitschrift The International Journal of Advanced Manufacturing Technology, online erschienen am 03.02.2023. Verfasst von David Downing und 7 weiteren Autor:innen. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 51 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Australian Research Council.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Surface roughness is traditionally evaluated with contact profilometry; however, these methods are not compatible with complex additive manufactured lattice structures due to limited physical access. For these scenarios, computed tomography (CT) is often used to provide qualitative insight into surface roughness but does not directly yield roughness profile data. This research describes a hybrid approach for the non-destructive quantification of roughness profile data for lattice structures based on the mathematical reconstruction and interpretation of CT data. Formal analyses are applied to propose the theoretical minimum CT voxel size required to characterise surface roughness for a specified sampling length. The method is verified against optical data for nominally flat metallic specimens and applied to metallic and polymeric cylinders fabricated by powder bed fusion and material extrusion respectively. This research also assesses the influence of CT reconstruction thresholding as a process variable and finds that roughness profile data is only weakly influenced by thresholding settings, due to scattering effects at the surface — a novel finding that provides certainty for the industrial application of this method. The ability of the proposed method to accurately characterise the inherent surface roughness of these processes as well as the effect of specimen orientation is thus demonstrated, enabling full geometric characterisation supporting subsequent certification analysis. The method can be algorithmically implemented in combination with the generative design of complex lattice structures to support structural certification requirements.

Förderung

  • Australian Research Council

Zitieren

APA

Downing, D., Rogers, J., Tino, R., Elambasseril, J., Wallbrink, C., Qian, M., Brandt, M., & Leary, M. (2023). A virtual stylus method for non-destructive roughness profile measurement of additive manufactured lattice structures. The International Journal of Advanced Manufacturing Technology, 125(7-8), 3723-3742. https://doi.org/10.1007/s00170-023-10865-9

Vancouver

Downing D, Rogers J, Tino R, Elambasseril J, Wallbrink C, Qian M, et al. A virtual stylus method for non-destructive roughness profile measurement of additive manufactured lattice structures. The International Journal of Advanced Manufacturing Technology. 2023;125(7-8):3723-3742. doi:10.1007/s00170-023-10865-9

BibTeX
@article{Downing2023,
  author = {Downing, David and Rogers, Jason and Tino, Rance and Elambasseril, Joe and Wallbrink, Chris and Qian, Ma and Brandt, Milan and Leary, Martin},
  title = {A virtual stylus method for non-destructive roughness profile measurement of additive manufactured lattice structures},
  journal = {The International Journal of Advanced Manufacturing Technology},
  year = {2023},
  volume = {125},
  number = {7-8},
  pages = {3723--3742},
  doi = {10.1007/s00170-023-10865-9}
}
Kostenlos starten →