Friction stir welding in dissimilar materials: a comprehensive review and numerical thermal investigation for aluminum–polymer joint
Continuum Mechanics and Thermodynamics · 2026-11 · 38 (6)
DOI: 10.1007/s00161-026-01543-8 ↗Kurz gefasst
Fachartikel in der Zeitschrift Continuum Mechanics and Thermodynamics, online erschienen am 28.10.2026. Verfasst von Khamda Herbandono und 3 weiteren Autor:innen. Die Arbeit nennt 72 Literaturangaben. Gefördert von: Badan Riset dan Inovasi Nasional.
Abstract (Originalsprache)
Friction stir welding (FSW) offers a promising solid-state approach for joining dissimilar materials in lightweight structures; however, aluminum–polymer systems present substantial thermophysical mismatches that lead to asymmetric heat transfer, complex interfacial behavior, and a narrow processing window that may induce polymer degradation. This study provides a comprehensive review of thermomechanical numerical simulation in dissimilar FSW, with particular emphasis on aluminum–polymer joints, complemented by a numerical thermal investigation of an AA6061–polycarbonate (PC) lap joint. Bibliometric analysis and systematic review of Scopus-indexed papers published between 2005 and 2026 were conducted to identify research evolution, thermomechanical fundamental, modeling strategies, state of the art, and critical research gaps. To complement the review, a coupled thermal finite-element model incorporating a DFLUX heat source and GAPCON interfacial conductance was developed and evaluated against in-situ infrared thermography. The model predicted a peak weld-center temperature of 248.13 °C, corresponding to a 0.05% deviation from the measured 248.0 °C, while the trailing-edge temperature reached 225.85 °C, with an 8.93% direct error. The predicted polymer-interface temperature of 147.7 °C falls within the PC glass-transition range (Tg ≈ 145–150 °C) and below the reported degradation onset. These findings demonstrate the potential of numerical thermal simulation to support assessment and predictive modeling of aluminum–polymer FSW, which exhibit significant differences in physical properties, to help predict the ideal process temperatures for joining processes.
Förderung
- Badan Riset dan Inovasi Nasional
Zitieren
APA
Herbandono, K., Purnama, H., Santoso, D., & Yulianto, K. (2026). Friction stir welding in dissimilar materials: a comprehensive review and numerical thermal investigation for aluminum–polymer joint. Continuum Mechanics and Thermodynamics, 38(6). https://doi.org/10.1007/s00161-026-01543-8
Vancouver
Herbandono K, Purnama H, Santoso D, Yulianto K. Friction stir welding in dissimilar materials: a comprehensive review and numerical thermal investigation for aluminum–polymer joint. Continuum Mechanics and Thermodynamics. 2026;38(6). doi:10.1007/s00161-026-01543-8
BibTeX
@article{Herbandono2026,
author = {Herbandono, Khamda and Purnama, Harry and Santoso, Dede and Yulianto, Katri},
title = {Friction stir welding in dissimilar materials: a comprehensive review and numerical thermal investigation for aluminum–polymer joint},
journal = {Continuum Mechanics and Thermodynamics},
year = {2026},
volume = {38},
number = {6},
doi = {10.1007/s00161-026-01543-8}
}
EUVIMED