EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Reliability-based topology optimization considering stochastic porosity defects in additive manufacturing

Yoo-Seong Park, Omid Nejadseyfi, Matthijs Langelaar

Structural and Multidisciplinary Optimization · 2026-11 · 69 (11)

DOI: 10.1007/s00158-026-04442-3 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Structural and Multidisciplinary Optimization, online erschienen am 07.11.2026. Verfasst von Yoo-Seong Park und 2 weiteren Autor:innen. Die Arbeit nennt 54 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Recent advancements in metal additive manufacturing (AM) technologies have enabled the precise fabrication of complex designs, promoting integration between topology optimization and AM. However, AM processes like laser powder bed fusion (LPBF) inevitably lead to microstructural defects, including keyhole-induced porosity and lack of fusion porosity. These pores significantly degrade the mechanical strength of printed components. The complexity of the process leads to the generation of random and unpredictable pores, which can vary from part to part even if all process parameters and geometry remain the same. Thus, this study proposes a reliability-based topology optimization framework that incorporates the uncertainty arising from random porosity defects during the AM process in a computationally efficient way. In this study, the probability of pore formation is assumed to increase linearly with distance from the build plate, which serves as a proxy for temperature. Assuming that defects are induced exclusively by overheating, the likelihood of pore formation increases with the temperature rise during the build process. A Monte Carlo approach is used to account for the stochastic pore realizations. To avoid performing a separate FEA for each realization, analytical stress fields around pores are used to augment the stress field obtained from a single FEA per optimization iteration. Adjoint sensitivity analysis is then employed for efficient gradient evaluation. Through 2D numerical examples on regular Cartesian grids, this study demonstrates and evaluates the effectiveness of the proposed approach while accounting for process-dependent stochastic porosity.

Zitieren

APA

Park, Y., Nejadseyfi, O., & Langelaar, M. (2026). Reliability-based topology optimization considering stochastic porosity defects in additive manufacturing. Structural and Multidisciplinary Optimization, 69(11). https://doi.org/10.1007/s00158-026-04442-3

Vancouver

Park Y, Nejadseyfi O, Langelaar M. Reliability-based topology optimization considering stochastic porosity defects in additive manufacturing. Structural and Multidisciplinary Optimization. 2026;69(11). doi:10.1007/s00158-026-04442-3

BibTeX
@article{Park2026,
  author = {Park, Yoo-Seong and Nejadseyfi, Omid and Langelaar, Matthijs},
  title = {Reliability-based topology optimization considering stochastic porosity defects in additive manufacturing},
  journal = {Structural and Multidisciplinary Optimization},
  year = {2026},
  volume = {69},
  number = {11},
  doi = {10.1007/s00158-026-04442-3}
}
Kostenlos starten →