EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Topology-inclusive aerodynamic shape optimisation using a cellular automata parameterisation

M J Wood iD, T C S Rendall, C B Allen, L J Kedward, N J Taylor, J Fincham, N E Leppard

Structural and Multidisciplinary Optimization · 2025-02 · 68 (2)

DOI: 10.1007/s00158-024-03916-6 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Structural and Multidisciplinary Optimization, online erschienen am 30.01.2025. Verfasst von M J Wood und 6 weiteren Autor:innen. Beteiligte Einrichtung: Department of Aerospace Engineering, University of Bristol, Bristol, BS8 1TR UK. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 44 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Engineering and Physical Sciences Research Council.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

A novel geometry parameterisation method constructed from a volume-of-solid driven cellular automata is presented. The method is capable of describing complex geometry of arbitrary topology using a set of volume-of-solid parameters applied to a geometry control mesh. This is done by approximating the smooth geometry of minimum surface area subject to a set of localised constraints on contained volume defined by both the control mesh and volume-of-solid parameters. Localised control mesh refinement is possible through splitting of control mesh cells to provide additional degrees of freedom where necessary. The parameterisation is shown to reconstruct over 98% of a library of aerofoil geometries to within a standard wind tunnel-equivalent geometric tolerance, and to recover known analytical optima in supersonic flow. Using gradient-free optimisation methods, the parameterisation is then shown to construct aerodynamic geometries consisting of multiple objects to package a set of existing geometries. Finally, the parameterisation is used to construct an optimal supersonic multi-body geometry with less than half the drag of the equivalent volume optimal single body.

Schlagwörter

Stichwörter der Autor:innen

Aerodynamic topology optimisationCellular automataOptimisationParameterisation

Autor:innen und Institutionen

  • Department of Aerospace Engineering, University of Bristol, Bristol, BS8 1TR UK.
  • MBDA UK Ltd, Bristol, BS34 7QS UK.
  • BAE Systems (Operations) Ltd, Bristol, UK.

ORCID-Profile: M J Wood

Förderung

  • Engineering and Physical Sciences Research Council

Zitieren

APA

Wood, M. J., Rendall, T. C. S., Allen, C. B., Kedward, L. J., Taylor, N. J., Fincham, J., & Leppard, N. E. (2025). Topology-inclusive aerodynamic shape optimisation using a cellular automata parameterisation. Structural and Multidisciplinary Optimization, 68(2). https://doi.org/10.1007/s00158-024-03916-6

Vancouver

Wood MJ, Rendall TCS, Allen CB, Kedward LJ, Taylor NJ, Fincham J, et al. Topology-inclusive aerodynamic shape optimisation using a cellular automata parameterisation. Structural and Multidisciplinary Optimization. 2025;68(2). doi:10.1007/s00158-024-03916-6

BibTeX
@article{Wood2025,
  author = {Wood, M J and Rendall, T C S and Allen, C B and Kedward, L J and Taylor, N J and Fincham, J and Leppard, N E},
  title = {Topology-inclusive aerodynamic shape optimisation using a cellular automata parameterisation},
  journal = {Structural and Multidisciplinary Optimization},
  year = {2025},
  volume = {68},
  number = {2},
  doi = {10.1007/s00158-024-03916-6}
}
Kostenlos starten →